Moiré | Miro Displays P19F98 guide

OSD-MENU DESCRIPTIONS

PINCUSHION

Select this control to straighten the sides of the image by pulling them in opposing directions.

TRAPEZOID

Select this control to even the widths of the top and bottom of the display (pulling the sides in opposite directions).

PARALLELOGRAM

Select this control to center the top and bottom of the display (pulling the sides in the corresponding direction).

PIN. BALANCE

Select this control to straighten the sides of the image by pulling them in the corresponding direction.

ADVANCED SELECT

MOIRÉ ADJUSTMENT

The screen image may shake slightly while the moiré cancellation function is ON. It is normally OFF (H=0, V=0).

V. MOIRÉ

To increase or decrease the vertical moiré of the image.

H. MOIRÉ

To increase or decrease the horizontal moiré of the image.

CORNER (OPTIONAL)

Use to adjust the alignment of top and bottom corner.

TOP CORNER

To increase or decrease the top corner of the image.

BOTTOM CORNER

To increase or decrease the top corner of the image.

OSD-MENU DESCRIPTIONS

COLOR SELECT

This control adjusts the color temperature of the screen image. 9300°K and 6500°K are preset by factory. You can not do adjustment.

9300°K : Which is bluish white light.

6500°K : Which is reddish white light.

USER : You can adjust the inidvidual color gun intensity by yourself. Increase or decrease red, green or blue depending upon which is selected.

OSD ADJUSTMENT

You can choose where you would like OSD image to appear on your screen.

H-POSITION (HORIZONTAL POSITION)

Select this control to center the OSD menu horizontally on the screen.

V-POSITION (VERTICAL POSITION)

Select this control to center the OSD menu vertically on the screen.

OSD TIMER

You can select how long the monitor waits after the last adjust of the knob to shut off the OSD menu. The time setting choises are from 8 to 60 seconds.

RESET

Resets the display settings to the original factory reset values. Press and hold down the Enter button until the progress bar disappears.

LANGUAGE

Select this control to choose from: English, German, Spanish, Italian, French, Portugal and Chinese.

EXIT

Exits the OSD controls. (Turning off the OSD windows).

DEGAUSS

Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence.