Miro Displays Monitor, TD271 manual Timing Table, PIN Assignment

TIMING TABLE

		Resolution		Frequency
Preset		Horizontal	Vertical	Horizontal	Vertical
	M1	640	480	31.47kHz	60.0Hz
VGA	M2	720	400	31.47kHz	70.0Hz
	M3	640	480	37.86kHz	72.8Hz
	M4	640	480	37.50kHz	75.0Hz
	M5	800	600	37.88kHz	60.3Hz
SVGA	M6	800	600	48.08kHz	72.2Hz
	M7	800	600	46.87kHz	75.0Hz
	M8	1024	768	48.36kHz	60.0Hz
XGA	M9	1024	768	56.48kHz	70.1Hz
	M10	1024	768	60.02kHz	75.0Hz
SXGA	M11	1280	1024	63.98kHz	60.0Hz

Note: In case of using MacintoshTM, you may need a Mac adapter.

PIN ASSIGNMENT

VGA Connector				VGA CONNECTOR
	Pin	1	Red	1	5
	Pin	2	Green
	Pin	3	Blue	6	10
	Pin	4	Ground
	Pin	5	Self Test
	Pin	6	Red Ground	11	15
	Pin	7	Green Ground
	Pin	8	Blue Ground
	Pin	9	DDC VDD
	Pin	10	Ground
	Pin	11	Ground
	Pin	12	DDC SDA
	Pin	13	Horizontal Sync.
	Pin	14	Vertical Sync.
	Pin	15	DDC SCL

Note: When resolutions are shown that are lower than the pixel count of the LCD panel, text may appear choppy or bold. This is normal all current flat panel technologies when displaying non-native resolutions on a full screen (below than 1280 x 1024 resolution). In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be down. When the interpolated resolution is not an exact multiple of the native resolution, the mathematical interpolation necessary may cause some lines to appear thicker than others.

12 13