Adjustments in YPbPr mode

YPbPr

To enter into YPbPr mode

Repeatedly press AV button on the remote control or SOURCE button on the set's panel until the screen display YPbPr, which indicates that the set is in YPbPr mode. Connect the YPbPr terminals to Set Top Box and make sure there is a signal input.

POWER
	CH
VOL	VOL
-	+

MENUENTER

C.SYS ZOOM CLK SLP

AUTO.ADJ P.M DSP

Adjusting picture

In YPbPr mode when there is correct input signal, press MENU button and PICTURE SETTING menu appears, Use CH / to select item and VOL+/- to adjust.

Item	VOL-	VOL+
Bright	darker	lighter
Contrast	weaker	stronger
Saturation	paler	deeper
Sharpness	softer	sharper

PICTURE SETTING

Brightness	-	+	25
Contrast	-	+	25
Saturation	-	+	25
Sharpness	-	+	25
USER_R	-	+	25
USER_G	-	+	25
USER_B	-	+	25
Color Temp		9300K

<V-> or V+> key to change

1 2 3

4 5 6

7 8 9

AV 0 -/--

OSD

STILL POSITION Bass+ Treb+

Bass - Treb-

Adjusting Colour temperature

You can select different Colour temperature to obtain correct white. Press MENU button, use CH / to select Color Temp item, press the VOL+/- to select between User, 9300K, 7300K, 6500K.

The USER_R, USER_G and USER_B can not accessed and adjusted unless you set Color Temp to "User".

PICTURE SETTING

Brightness	-	+	25
Contrast	-	+	25
Saturation	-	+	25
Sharpness	-	+	25
USER_R	-	+	25
USER_G	-	+	25
USER_B	-	+	25
Color Temp		9300K

<V-> or V+> key to change

Adjusting horizontal/vertical position

Press MENU button twice and the PICTURE POSITION menu appears. Use CH / to select item and VOL+/- to adjust.

When a nonstandard signal input to the set	PICTURE POSITION
and the picture may not be in the screen
	Horizontal	-	+	25
	Vertical	-	+	25
centre. Now you can adjust its horizontal	Vertical	-	+	25
centre. Now you can adjust its horizontal	Reset

and vertical position to display correctly.	<V-> or V+> key to change