Palsonic TFTV765 owner manual Trouble shooting, Symptoms Check the following items

Page 29

Trouble shooting

Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.

Symptoms

Check the following items

 

 

Power is not turned on.

Be sure the power cord is plugged in.

Poor colour, poor tint.

Contrast, colour, tint are not correctly adjusted.

 

 

Spots appear on the screen.

Possible interferences of automobiles, motorcycle,

 

trolley bus, neon lamps, etc.

Stripes appear on the screen.

Possible interference of electronic interference

 

from another TV set, a computer, an electronics

 

game machine, a broadcast station, etc.

 

 

Double images or "ghosts".

This may be caused by reflections from nearby

 

mountains or buildings.

 

Check the antenna direction.

Snowy picture.

It is possible that the aerial "lead-in" is damaged or

 

has come off.

 

Check the antenna direction.

 

 

TV cabinet creaks.

Even if the picture or the sound is normal, changes

in the room temperature sometimes make the TV

 

 

cabinet expand or contract, making a noise. This

 

does not indicate a malfunction.

 

 

Remote control does not

The batteries may be worn out.

work.

The batteries may be installed with their polarity

 

reversed.

 

 

Control buttons do not work

Unplug the power cord, wait for some seconds.

 

Then re-plug the power cord and turn on the unit

 

again.

 

 

LCD Display panel information

Important Information Regarding Use of Video Games, Computers, Captions or Other Fixed Image Displays. The extended use of fixed image program material can cause a permanent "shadow image" on the LCD panel.

This background image is viewable on normal programs in the form of a stationary fixed image. This type of irreversible LCD panel deterioration can be limited by observing the following steps:

A. Reduce the brightness/contrast setting to a minimum viewing level. B. Do not display the fixed image for extended periods of time.

C. Turn the power off when not in actual use.

Note:

The marking or retained image on the LCD panel resulting from fixed image use is not an operating defect and as such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of time.

28

Image 29
Contents N111 Contents Important Safety Cautions High Voltage exists in this TV set. Do not remove the cover Front Identification of controlsBack Remote Control Effective remote range Battery installationAntenna installation/Adaptor connection InstallationConnecting video/audio equipment Red Black Connecting DVD Player and speakersConnecting YPbPr terminals Installation Elevation adjustment Menu Introduction Picture SettingTo adjust pictures brightness and contrast Turning On/Off Selecting input signalTurning On Turning OffTo enter into Channel Setting menu Channel PresetFine Tuning Auto SearchChannel Edit Channel SkippingChannel Select Using CH / buttonUse 0~9 digit buttons and -/-- button Use previous channel buttonAdjusting picture Picture AdjustmentUsing Still button Using AUTO.ADJ buttonAdjusting Volume Adjusting SoundSetting Sound mode SoundTo enter into Setup menu System settingSetting OSD Language Colour systemSetting Zoom mode Setting OSD positionSetting OSD Background Use CLK button TimerUse SLP button To enter into YPbPr mode Adjustments in YPbPr modeAdjusting Colour temperature Adjusting horizontal/vertical positionTo enter into PC mode Adjustments in PC modePC signal format Use AUTO.ADJ buttonAdjusting phase and frequency Adjusting brightness and contrastSymptoms Check the following items Trouble shootingSystem VHF UHF Catv PAL-B/G Specifications604-L32B13-07A Ver