Basic Operations
Turning the Unit On and Off
Turning On
Insert the power cord into the wall outlet.
Press the Power Switch on the TV set, the set is in standby mode.
Press the Power 
button on the remote control.
The unit will be turned on and you will be ready to use it's features.
Turning Off
With the power on, press the Power 
button on the remote control to turn off the TV set temporarily. If you want to cut off the power completely, press the Power Switch on the TV set.
Note:
You can also use the Power 
button on the control panel on the main unit.
Selecting Input Source Signal
1
2
3
Press the Source button to access Source Select menu.
Press CH+ or CH- to select a desired input source.
Press Enter to confirm and the unit displays signal from the selected input source.
Source Select
VGA
DVI
RF
Video1
Video2
YPbPr1
YPbPr2
Viewing the Menus and Displays
Your LCD TV has a simple,
Viewing the Menus |
|
|
| |
1 | With the power on, press the Menu button on the remote control. The main |
|
|
|
| Brightness |
| ||
|
|
|
| |
| menu appears on the screen. The picture menu is selected. |
| Contrast |
|
|
|
| Sharpness |
|
2 | Use the CH+ or CH- to select menu item. Use VOL+ or VOL- to adjust value of item. |
| Tint |
|
|
|
| ||
| Use Enter to confirm ,enter submenu or toggle the settings of the selected menu item. |
|
|
|
| You can press the Menu button repeatedly to exit the menu operations. |
|
|
|
|
|
|
|
|
Note:
To clearly introduce the menu operations, this operation manual provides a description based on operation with the remote control.
Displaying Status Information
Press the DSP button on the remote control, the unit will display current status information such as channel number or signal source, etc.
16