Loading Default Values
You may quickly load default values by using the Default item.
27
Press Enter repeatedly to select Off, Auto, Strong, Middle or Weak.
Phase
Screen
N/R
Default
Auto
1 Press Menu to display the menu main page.
2 Press CH+ or CH- repeatedly to select Setup item. 3 Press Enter to access the submenu.
4 Press CH+ or CH- repeatedly to select N/R item.
5
For 480i or 480P signal format, you can select the image aspect ratio between 4:3, 16:9, Panorama and Zoom. For 720P or 1080i signal format, you can select the image aspect ratio between 4:3 and 16:9.
Note:
You may quickly select the screen aspect by using the Screen button on the remote control.
Reducing Picture Noise
Press Enter repeatedly to select a desired aspect ratio.
Phase
Screen
N/R
Default
16:9
Press Menu to display the menu main page.
1
2 Press CH+ or CH- repeatedly to select Setup item.
3 Press Enter to access the submenu.
4 Press CH+ or CH- repeatedly to highlight Screen item.
5
Adjusting Screen Aspect
Press VOL+ or VOL- repeatedly to adjust the value.
4
Press Enter to access the submenu.
The Phase item will be highlighted automatically.
Phase Screen N/R Default
1 Press Menu to display the menu main page.
2 Press CH+ or CH- repeatedly to select Setup item.
3
Setting System In YPbPr Mode
Adjusting Phase