PNY P-DSA2-PCIE-RF user manual Installation. To make this floppy disk, copy the contents

Page 13

installation. To make this floppy disk, copy the contents of

the “PCI_IO\SiI3132\Driver\RAID\FLOPPY” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Windows® 2000 installation procedure.

3.Restart the computer when prompted by the installation.

4.At the Windows® 2000 Setup screen, press F6 to install the RAID driver.

5.When prompted, press S to specify the location of the driver.

6.Insert the floppy disk, then press Enter.

7.Select Silicon Image SiI 3132 SoftRAID 5 Controller for Windows 2000, then press Enter.

8.Press Enter again to finish driver installation, then follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.At Found New Hardware Wizard, click Next.

3.Select Search for a suitable driver for my device (recommended) then click Next.

4.Insert the provided driver CD into your CD-ROM Drive, check

Aug/07

13

MN2036400001

Image 13

Contents PCI Express Sata II RAID 2 CH External/ 2 Internal Card Connectors Features and BenefitsBus Interface System Requirements Package ContentsJumper Hardware DescriptionHardware Installation Device Connection Auto configuration recommendedRAID Arrays RAID 0 StripingSelect Auto configuration, then press Enter Manual configurationSelect Manual configuration then press Enter RAID 1 Mirror For New/Blank Hard Drives For Existing Hard Drives with Data Select Manual configuration, then press EnterSelect Create with data copy, then press Enter Select Create RAID Set press Enter Rebuilding a Failed Mirror SetSelect Rebuild Raid 1 Set, press Enter Resolving Conflicts Deleting RAID ArraysDriver Installation Bios ConfigurationLow Level Format Logical Drive InfoInstallation. To make this floppy disk, copy the contents For Windows XP/Server At the Found New Hardware Wizard For Windows XP-x64/Server For Windows Vista For An Existing Installation For Windows Vista-x64 To Verify Windows Installation SATARAID5 Management Software InstallationSelect Device Manager TypeD\PCIIO\SiI3132\Driver\RAID\32-bitWindowsFor Windows XP-x64//Server 2003-x64/Vista-x64 SATARAID5Management Utility\3132-W-I32-Sm15141.msi, thenAppendix a