J4,J3, J2, J1
J4,J3, J2, J1
Internal SATA Port C enabled (Con4)
External SATA Port A enabled (Con1)
There are four SATA ports on the card. However only two of the four ports may be enabled at any time.
NOTE
Hardware Installation
1.Turn Off the power to your computer and all the connected peripheral devices.
2.Unplug the power cord from the back of the computer.
3.Remove your computer’s cover.
4.Remove the slot bracket from an available PCI Express slot.
5.To install the card, carefully align the card’s bus connector with the selected PCI Express slot on the motherboard. Push the board down firmly, but gently, until it is well seated.
6.Replace the slot bracket’s holding screw to secure the card.
Aug/07 | 5 | MN2036400001 |