Ultra Electronics Card Systems
SECTION 4.3 | PRINTER SETTINGS |
The “Printer Settings” tab enables the user to set the printing parameters e.g. Speed, Temperature and Bend Remedy. The settings are shown in a user friendly manner via the P.C for every printer connected to the SCSI bus.
So for example if two printers (XID 450’s) were connected to the SCSI bus two tabs would show at the top of the page:
Printer SCSI ID : 2
Printer SCSI ID : 3 etc.
Individual printers attached to the SCSI Bus.
Printer Settings – see Section 8 for descriptions
Printer Setting Transfers (described below).
•Load from File Select a profile currently loaded on the computer
• | Save to file | Save a profile to the computer. |
• | From Printer | Get current settings from the printer. |
• | To printer | Send settings currently on the screen to the printer. |
• | Test Print | Produces an internal test card from the printer. |
NOTE | A PROFILE IS A FILE ON THE PC THAT CONTAINS SPECIFIC | |
| PRINTER SETTINGS | |
25 Magicard Prima Driver Manual