- FACTORY RESET
Press the + button to restore Volume, OSD
Factory Reset
+Yes - No
3.4Mechanical Adjustment of the LCD Position
The LCD position on a VESA Mount Preh Touch / Screen Commander cannot be changed directly at the Product. The adjustment (tilting or swinging) of the Touch Screen Commander depends on the pole or wall mount hardware used.
The LCD of the Preh Touch / Screen Commander is swingable and tillable. According to the usage the LCD position can be changed.
The below picture shows the model with the multimedia base.
Pict. 8: adjusting screws on rear side
The infinitely variable adjustment of the tilting force can be made with two adjusting screws located on the rear of the monitor. The adjustment torque (1 - 8 Nm) should be about the same on both screws.
Pict. 9: adjusting screws below
The infinitely variable adjustment of the swinging force can be made with two adjusting screws in the base of the monitor. The adjustment torque (1 - 8 Nm) should be about the same on both screws.
13 | subject to change without prior notice | 05.2004 |
| Preh KeyTec GmbH, |
|