Powercom UPS-200, 400, 250 user manual Specifications, Input

Page 11

charged. Before storing, charger the UPS for at least 4 hours. Remove any accessories in the accessory slot and disconnect any cables connected to the computer interface port to avoid unnecessary draining the battery.

7.2 Extended storage

During extended storage in environments where the ambient temperature is –15

to +30 (+5 to +86 ),charge the UPS’s battery every 6 months.

During extended storage in environments where the ambient temperature is +30 to +48 (+86 to +118.4 ), charge the UPS’s battery every 3 months.

8.SPECIFICATIONS

MODEL

 

UPS200

UPS-250

UPS-400

INPUT

Capacity

200VA

250VA

400VA

 

Voltage

100V,115V,230V

 

 

 

Frequency

50 or 60 Hz +/-5% (auto sensing)

 

OUTPUT

Voltage (on battery)

Simulated sine wave at Line Input +/-5%

11

Image 11
Contents UPS-200/250/400 Tabel of Contents Important Safety INSTRUCTIONS, Save These Instructions Introduction SafetyOutlooking FeaturesSystem Description Site Selection Installation and OperationStaring operation Connecting the UPSUnpacking Backup operation MaintenanceBattery Replacement TroubleshootingTrouble Shooging Chart Storage conditions StorageInput SpecificationsConformance