POSIFLEX Business Machines PST KB136 manual

Alt-W– write key definitions to the programmable keyboard

Alt-X– quit the keyboard programming program

any other key stoke – will be taken as an input in ASCII-code editing mode, and will give no influence if the current key was last edited in scan- code editing mode

COMMAND LISTING IN ASCII-CODE EDITING MODE

ESC – enter view mode

F1 – get help on command list of ASCII- code editing mode

F5 – enter view mode

F8 – enter view mode

F10 – enter view mode

BkSp – delete the character to the left of cursor

Ins – toggle insert/overwrite status for editing (default = insert) Del – delete the character where cursor stays or the last character Home – go to first position within the key definition

End – go to last position within the key definition

PgUp – go to one page less in cyclic manner

PgDn – go to one page next in cyclic manner

Up arrow – move cursor to one row up in cyclic manner and enter view mode Down arrow – move cursor to one row down in cyclic manner and enter view mode Left arrow – move cursor to one character left within the key definition

Right arrow – move cursor to one character right within the key definition Alt-A– enter view mode

Alt-D– enter time delay mark into the key-content

Alt-N – enter view mode

Alt-S– enter a multi-level separator between definitions of different levels. Alt-X– enter view mode

Alt-27 – enter an “ESC” into the key-content

Alt-8 – enter a “BkSp” into the key-content

Ctl-C – immediately terminates the programming utility.

4 - 7