POSIFLEX Business Machines PST KB136 instruction

any other key stoke – will be taken as an input in ASCII-code editing mode.

COMMAND LISTING IN SCAN CODE EDITING MODE

ESC – leading code to enter scan code of any key after it into key-content, except “ESC” + “F” for utility version since 2.15.xx

ESC-F – leading code of arbitrary release code for utility version since 2.15.xx. usually used to release “CTL”, “ALT” or “SHF”.

F1 – get help on command list of ASCII- code editing mode

F5 – enter view mode

F8 – enter view mode

F10 – enter view mode

BkSp – delete the character to the left of cursor

Ins – toggle insert/overwrite status for editing (default = insert) Del – delete the character where cursor stays or the last character Home – go to first position within the key definition

End – go to last position within the key definition

PgUp – go to one page less in cyclic manner

PgDn – go to one page next in cyclic manner

Up arrow – move cursor to one row up in cyclic manner and enter view mode Down arrow – move cursor to one row down in cyclic manner and enter view mode Left arrow – move cursor to one character left within the key definition

Right arrow – move cursor to one character right within the key definition Alt-A– enter view mode

Alt-D– enter time delay mark into the key-content

Alt-M – enter a multi-level shift marker into the key-content

Alt-N – enter view mode

Alt-S– enter a multi-level separator between definitions of different levels. Alt-X– enter view mode

Alt-27 – work like “ESC” as the leading code for scan codes.

Alt-8 – enter a “BkSp” into the key-content

Ctl-C – immediately terminates the programming utility.

4 - 8