PT760 or PT760XL
Download and Install instructions for Version 2.10.
The following are instructions are for the download of the software version 2.10 for the PT760 and/or PT760XL, a
This document will assist you with preparing a PC card for the installation of Version 2.10 into a PT760 or PT760XL system. You will need an ATA PC Card (Type I or II PC Card) with a capacity of 30MB or better to perform this task.
-Download the appropriate
-Install a flash PC Card into the PC, using appropriate procedures for the intended PC and operating system. Format the PC card.
-
-Prior to installing the PCMCIA card into the PT760 or PT760XL systems, note all of the ISDN and/or TCP/IP and dialing directory information. Reloading of system software by use of the PCMCIA card will erase all preprogrammed information in the PT760 or PT760XL system, requiring the user to reprogram the aforementioned information after a software reinstall.
-Power off the PT760 or PT760XL videoconference system. Install the newly loaded PCMCIA card into the PCMCIA card slot in the rear of the PT760 or PT760XL system and turn the power back on. When prompted, depress the 1 key to initiate installation of the new software.
CAUTION!
Before removing the PC Card from the PC, be sure to follow the operating systems procedures for PC Card removal. Failure to follow such procedures exactly may cause serious damage to the PC Card and/or the PC; Polycom shall not be liable for any damage resulting from your failure to follow your operating system's procedures.
CONTACT SUPPORT
For further Technical Support please contact us at