Operating Instructions
Electric Wine Opener Connection and Use
We recommend that you charge your electric wine opener for at least eight hours before using it for the first time. Please follow the instructions for recharging below:
Recharging your Electric Wine Opener
Plug one end of the adapter cord into the base of the charging unit and the other end into a power outlet. Place the Electric Wine Opener into charging unit, ensuring that it is firmly in position and that it is fully engaged with the charging connection. It will take approximately
1 Place the Electric Wine Opener on |
top of the wine bottle making sure |
that it remains as upright as possible |
at all times. If you hold the Electric |
Wine Opener at an angle to the |
bottle it will not remove the cork |
properly. (Figure 3) |
2 Hold the Electric Wine Opener firmly |
and depress the lower part of the |
switch. The corkscrew spiral will turn |
in a clockwise direction and enter the |
cork, then gradually remove it from |
the bottle. When the Electric Wine |
Opener mechanism has stopped, the |
cork has been fully removed from the |
bottle. |
Figure 2
To Operate Your Electric Wine Opener
The Electric Wine Opener is operated by one single switch. The switch has two functions. Press the lower part of the switch to remove a cork from a bottle. Press the upper part of the switch to release a cork from the mechanism after you have removed from the bottle. (Figure 1)
Up
Down
Figure 1
3 | Lift the Electric Wine Opener away |
| from the bottle. To remove the cork |
| simply depress the upper part of the |
| switch. The spiral will turn in a |
| |
| release the cork. (Figure 4) |
4 | Always return the Electric Wine |
Opener to the recharging unit when finished with it. This will protect the mechanism while it is not in use.
Figure 3
Before removing the cork you must remove any foil from the bottle using the foil cutter provided. (Figure 2)
6 | www.oster.com |
www.oster.com
Figure 4
7