Care of Your Subwoofer

Your Velodyne subwoofer does not require any regular maintenance. Normal dusting or cleaning of the surface for appearance purposes is all that is required. We suggest you avoid any harsh detergents or chemicals when cleaning the cabinet. Abrasives, detergents, or cleaning solutions may damage the finish on the cabinet. We recommend using only a damp cloth to clean the cabinet.

During normal conditions, your new subwoofer may be left on continuously without any problems. The unit is equipped with a signal-sensing turn on/off that will automatically turn on the unit when a signal is present at the inputs and turn off the unit after several minutes when there is no longer any signal at the inputs.

Protection Circuitry

Your new subwoofer is equipped with circuitry to provide maximum performance with greatest reliability.

The unit is protected against:

1)Overheating the amplifier.

2)Excessive drop in power line voltage.

If either of the above should happen, you should reduce the volume setting or shut the unit off until normal operating conditions return. You may also want to plug the unit into a different wall outlet, as dropping power line voltage will be most noticeable under strenuous conditions and may result in the unit shutting down intermittently.

Troubleshooting and Service

Before seeking service for your amplifier or subwoofer, please re-check all systems. Following is a simple troubleshooting guide to assist you.

1.Verify that the unit is plugged in and power outlet used is active.

2.Is the power switch on?

3.Is the unit receiving an input signal from your source?

4.Have all controls (volume, crossover, phase, etc.) been properly set?

5.If the unit has been running at high levels, one of the protection circuits may be engaged. Has the amplifier overheated?

6.Make sure binding posts are tightened.

If the protection circuitry is active, the unit may cycle on and off until operating parameters return to normal. Under more serious conditions, the unit may shut off completely. Normal operation should return upon cooling, but you may be required to turn the power off and then on again to reset the unit.

The following conditions require service by a qualified technician:

1.The power cord has become damaged

2.The unit does not appear to operate normally or exhibits a marked change in performance

3.The unit has been exposed to water

4. Some part of the chassis or circuitry is physically damaged
.w w w . v e l o d y n e . c o m	VMS User’s Manual

VMS-8 specifications

The Velodyne Acoustics VMS-8 is a prominent model in the realm of professional audio systems, designed specifically for high-quality sound reproduction in various settings, including home theaters, commercial spaces, and professional venues. This versatile speaker system combines advanced technology with a commitment to delivering crystal-clear audio, making it a preferred choice for audiophiles and professionals alike.

One of the standout features of the VMS-8 is its innovative driver design. It is equipped with an 8-inch high-efficiency woofer that provides powerful, deep bass response while maintaining clarity across a broad frequency range. The woofer is complemented by a precision-engineered tweeter that delivers crisp and clear high frequencies, resulting in a well-balanced sound profile. This two-way configuration ensures that the speaker can handle everything from the subtle nuances of classical music to the thunderous explosions of action films.

The VMS-8 utilizes Velodyne’s patented Digital Signal Processing (DSP) technology, which optimizes audio performance by intelligently adjusting the sound output according to the acoustics of the room. This feature ensures that users experience consistent audio quality, regardless of the environment. Additionally, the DSP allows for multiple equalization presets, enabling users to tailor the sound characteristics to their preferences or specific listening situations.

Another key characteristic of the VMS-8 is its robust construction. The speaker is housed in a solid enclosure designed to minimize resonance and standing waves, providing pure and uncolored sound reproduction. The front baffle is built from high-density MDF, which helps in preventing vibrations that could distort the audio signal. Furthermore, the cabinet features a sleek and modern design, making it an aesthetically pleasing addition to any setup.

Connectivity options for the VMS-8 are extensive, supporting both wired and wireless connections. It features multiple input options, including XLR, TRS, and RCA, making it compatible with a wide range of audio sources, from mixers to digital audio workstations. The unit also includes Bluetooth functionality, allowing for effortless streaming from mobile devices, an essential feature for modern listening habits.

In conclusion, the Velodyne Acoustics VMS-8 stands out for its combination of advanced driver technology, DSP capabilities, robust design, and versatile connectivity. Whether used in a home theater, studio, or commercial application, the VMS-8's comprehensive feature set ensures an immersive audio experience that meets the demands of discerning listeners.