Trouble shooting
If you are having problems operating the
Problem | Possible Reason | Solusion | |
|
|
| |
No power | Power core loose | Reinstall the power plug | |
| Preset max music output volume is 0, it | Set the preset music volume higher | |
| will limit the music output level to 0. |
| |
No music output |
|
| |
Select the wrong audio input | Switch to correct audio input | ||
| |||
|
|
| |
| Audio input plug loose | Reinstall the audio input cable | |
|
|
| |
| Microphone cable broke | Fix or replace the cable | |
|
|
| |
| Microphone plug loose | Reinstall the microphone plug | |
No microphone output |
|
| |
Master microphone volume knob sets to 0 | Adjust the volume to appropriate level | ||
| |||
|
|
| |
| Mic. Max volume(in Mic. Menu) sets to 0 | Adjust the volume to appropriate level | |
|
|
| |
No video output | Video input loose; Wrong video input | Reinstall video input; switch to correct | |
switch; Video device setup error | video input ; Change another device. | ||
| |||
|
|
| |
No mixing effect | Max effect level(in Mic. Menu) sets to 0 | Adjust the volume to appropriate level | |
|
|
| |
| Audio input loose | Reinstall the audio input | |
One channel no sound |
|
| |
Speaker cable loose | Reconnect the cable to speaker | ||
| |||
|
| ||
|
|
| |
Remote doesn’t work | Out of batteries | Change the batteries and try again | |
| |||
|
|
|
Specification
Test under max music volume, 1KHz analog frequency signal with 1V(RMS), 10K ohms resistance.
Power:
Max output | 300W x 2 |
Music:
Music frequency | 20 |
Input sensitivity | |
Max music signal voltage | 2.2V(THD <=0.5%) |
Music/Noise | 75dB |
Microphone:
Microphone | 20 |
Mic. sensitivity | 15mV |
Max mic. signal | 19mV |
Microphone/Noise | 73dB |
Machine:
Power | AC 110V / 50Hz |
Max power | 650 W |
Machine | 435x324x132(mm) |
Machine | 12.5 Kg |
19