Velodyne Acoustics SPL-800, SPL-1000, and SPL-1200 Crossoverswitch-INTERNAL X-OVER/SUBWOOFERDIRECT

Page 9

between the subwoofer and your main speakers/amplifier. To adjust, simply listen to the system with music playing. Then move the switch from one position to the other and listen for a change in low frequency output. The correct position will have a greater amount of apparent low frequency output.

Crossoverswitch-INTERNAL X-OVER/SUBWOOFERDIRECT

This switch allows the electronic crossover circuitry to be removed from the signal path. This is required in certain installations which route the signal through external processors with a crossover circuit of their own, such as the new digital units. Simply move the switch to SUBWOOFER DIRECT to disengage the built in crossover. For all other installations which do not have a separate electronic crossover, we recommend you leave the switch set to INTERNAL X-OVERto provide optimum performance.

Auto turn on function

With this function in the "auto" position, your subwoofer can be safely left with the main power switch on continuously. The subwoofer will turn itself on automatically when an audio signal is present. If no signal is present for approximately 10 minutes, the unit will switch to standby mode. While in standby mode, your subwoofer will draw very minimal power. This function can be disabled by leaving the switch in the "on" position.

Power switch

The master power switch is located on the lower half of the unit. This rocker style switch is the main on/off for the unit. This switch should be set to position 1 (up) for on, and 0 (down) for off. If the unit is to be left unused for an extended period of time, the master power switch should be turned off.

Subwooferoutputs

The Velodyne subwoofer is designed to operate using the full range audio signal for input when using the built-in crossover. Some processors/ receivers, have a "subwoofer out" jack that is internally filtered and designed to be used with a conventional amplifier and speaker. In some rare cases, combining both an external crossover and the one internal to the subwoofer may result in low output and increased noise. In these installations you may need to bypass the internal crossover in either the processor or Velodyne subwoofer. In some installations, simply setting one crossover to a higher frequency (such as 120 Hz) will restore maximum performance. To bypass the subwoofer's internal crossover when the unit

continued. . .

8☞

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SPL-800, SPL-1000 SPL-1200 Series Important Safety Instructions Wichtige Sicherheitshinweise Importantes Consignes DE Securite Congratulations Product Features Prepare for InstallationPlacement Page Inputs InstallationCrossoverswitch-INTERNAL X-OVER/SUBWOOFERDIRECT Line-level Connection Option B Line-level Connection Option aSPL Series Iitm Installation Using Stereo Line-level Inputs Speaker-level Connection Subwoofer OutputsInterconnect Cables Installation Using Speaker-level Inputs Protection Circuitry Care of Your SubwooferTroubleshooting and Service Specifications Thank You for Purchasing an SPL Series II Velodyne Subwoofer Page Velodyne Acoustics, Inc

and SPL-1200, SPL-1000, SPL-800 specifications

Velodyne Acoustics is a leading manufacturer of high-performance audio products, particularly renowned for its subwoofers. Among its impressive lineup, the SPL series stands out for delivering powerful, accurate bass reproduction that enhances the audio experience in both home theater and music listening settings. Key models in this series include the SPL-1200, SPL-800, and SPL-1000, each distinguished by their individual features and technological advancements.

The SPL-1200 is a powerhouse subwoofer, featuring a robust 12-inch driver that delivers deep, rumbling bass. Its patented Digital Drive Control System intelligently regulates performance, ensuring precise sound reproduction without distortion. With a 1200-watt peak power rating, the SPL-1200 is capable of producing thunderous low frequencies that fill large spaces effortlessly. Additionally, the subwoofer includes a sophisticated room equalization system, allowing it to adapt to various room acoustics and deliver optimized sound.

The SPL-800, although smaller in size, does not compromise on performance. Its 8-inch driver, combined with a 300-watt RMS and 600-watt peak power output, delivers fast and articulate bass sound. It’s particularly suitable for smaller rooms or for users who prefer a less obtrusive subwoofer. The SPL-800 also features an advanced low-pass filter, allowing for seamless integration with satellite speakers and ensuring a balanced sound profile across the audio spectrum.

The SPL-1000 strikes a balance between power and compactness. With its 10-inch driver and a power output of 1000 watts peak, it is designed to deliver solid, impactful bass. The inclusion of Velodyne's exclusive DSP technology helps optimize the subwoofer’s performance for a variety of listening conditions, creating an immersive audio environment. This model also boasts an adjustable phase control that enhances connectivity with other speakers, providing flexibility in setup and placement.

Each model in the SPL series emphasizes Velodyne's commitment to performance, quality, and innovation. The combination of advanced driver technology, powerful amplification, and intelligent digital processing ensures that users experience rich, dynamic bass that enhances any audio environment. Whether users opt for the robust SPL-1200, the compact SPL-800, or the versatile SPL-1000, they can be assured of a premium auditory experience marked by precision, depth, and clarity.
Top Page Image Contents