5.Type S to save the programmed data into the KB5 directory. You can select up to an 8 character name. It will be saved with a
.TPL extension.
6.Press ESC to terminate the Data Transfer Menu.
7.Press F10 followed by Y to exit the utility program.
8.To verify that your program has been successfully installed, simply press any programmed key. The information stored in that key will appear on the monitor.
9.The next time you want to install the legend you just created simple press F2 to call up the Data Transfer Menu and then press L to open the Load window.
10.Enter the name of the file in the legend window with its proper extension (.TPL) and press ENTER. The legend will now show on your monitor.
11