SPECIAL CONFIGURATIONS
The KB5000 can be set up with many different programming options. To activate the configuration menu screen the KB5 program must first be placed into the extended menu (Ctrl, Alt, F4). Press F3 to open the configuration screen. By depressing the highlighted letter in each option the program will enable or disable that option. The default settings are shown in the graphic below.
Send |
|
|
| Yes | |
Enable beep while a key pressed |
|
|
| Yes | |
No beep if a key is undefined |
|
|
| Yes | |
Translate to |
|
|
| Yes | |
Emulating XT keyboard always |
|
|
| No | |
Use ALT+num to generate ASCII |
|
|
| No | |
Enable Typematic for scan codes |
|
|
| No | |
Enable Typematic for ASCII codes |
|
|
| No | |
Emulating Link Terminal |
|
|
| No | |
InterCharacter Delay |
|
| mS | ||
2 |
| ||||
Enable RS232 Output |
|
|
|
|
|
|
| No |
| ||
Baud Rate: |
|
|
|
|
|
| 9600 |
| |||
|
|
|
| ||
Parity: |
| NONE | |||
|
|
| |||
Length of Data: |
| 8 | |||
|
|
|
|
|
|
Press a
Esc ==> Quit from this menu
17