O'Neil 2TE manual Charge LED Indicators

Page 13

MICROFLASH 2Te PRINTER USER'S GUIDE

Charge LED Indicators

LED	State of Charge	Action
Flashing	Charge in progress.	Wait for the charge
Orange		LED to turn green.
Flashing Red

Green	Charge complete.	None.
Red flash -	Battery is too cold.	Change environment.
slow

Red flash -	High temperature.	Change environment.
fast
Red to	Battery voltage is very	Wait for solid red.
orange solid	low.	Restart charge.

Red to	Battery voltage is too	Replace battery.
orange flash	high.
- fast
Orange flash	Charge timeout.	Restart battery
- slow		charge.

Orange flash	Internal error.	Reset printer.
- fast

Power LED Indicators

LED	State of Charge	Action
Solid green	Printer is on.	None.

Black	Printer is off.	Printer needs to be
		turned on using the
		Green self-test
		button.
		Printer needs to be
		recharged.

11

Image 13

Contents Users Guide Using Buttons, LEDs, and Audio Indicators MicroFlash 2te Printer Top View Charging the Battery Using the Battery General GuidelinesDetermining Battery Condition Installing Paper Printing a Self-Test Removing a Paper Jam Clearing Linerless Paper JamsAvoiding a Paper Jam Remove the Linerless Paper from the Print Head Configuring the PrinterUsing Printer Data Cables Microflash 2Te Printer Users Guide Bluetooth Parameters Using BluetoothLED Indicators Using Buttons, LEDs, and Audio IndicatorsButton Functions Charge LED Indicators CardReader Audio Indicators Audio IndicatorsGeneral Guidelines Using a CardReaderFCC Notice Agency ApprovalsMicroflash 2Te Printer Users Guide Microflash 2Te Printer Users Guide Copyright Media Supplies Maintenance SuppliesFor more information Page World Headquarters