Loading Presets and Setups, Saving Presets and Setups

L3-16 User Guide

Loading Presets and Setups

Click-and-holdon the Load button to see the Load pop-up menu. The menu is divided into four sections. If a section is not currently available it will not appear in the Load pop-up menu.

Open Preset File… Select to open any setup or preset file, whether from the Library or your own creations.

‘Filename.xps’: Displays any currently loaded Setup File and its presets.

Factory Presets: Displays the default Factory Presets.

User Presets: Displays any loaded User Presets.

Saving Presets and Setups

Click-and-hold on the Save button to see the Save pop-up menu. Four options are available. If an option is not currently available it will be grayed out and inaccessible.

Save to New File…	Select this to start a new Setup file. There are two prompts - first
	for the setup filename, then for the preset name. You must provide
	a name for both the setup file and the preset. Click OK (ENTER)
	to complete the save. It is a good idea to create a folder in which
	to save several setup files for a project.
Save ‘File Name’ – “Preset Name” Overwrites the settings of the loaded preset (whether a User
	Preset or a preset from a Setup File) with the current settings. If a
	Setup File is currently loaded, the name of the Setup File is
	displayed followed by the name of the preset itself. If a User
Save to ‘File Name’ As…	Preset is loaded, its name is displayed.
Save to ‘File Name’ As…	Saves the current settings as a new preset into the Setup file that
	is open (if one is not open, the option is grayed out). You will be
Put into Preset Menu As…	prompted to give the preset a name.
Put into Preset Menu As…	Save the current settings into a User Preset that will always be in
	your Load menu (until deleted). You will be prompted to give this
	preset a name. User Presets are stored in the plug-in’s preference
	file.

Deleting Presets

You may delete User Presets and presets within a Setup File. Factory Presets and Setup Library files cannot be deleted or overwritten.

1.Hold the Command (Mac)/Control (PC) key down.

2.Click-and-hold the Load button to see the pop-up menu.

3.While still holding the Command/Control key, select the preset or setup to delete.

L3-16 User Guide