Opticon LPN5627, LPR5627 user manual

Page 31

Manual No. 25-ULPNR101-03; Feb, 2003

LPN5627 / LPR5627 Laser Fixed Mount

Scanner

 

♦Good LED after decoding (green, 200 ms).

♦RS232C (9600 baud, 8, 1, no parity, no handshaking).

Read Rate Mode (U8) - This mode resets all unit parameters to a predefined set of defaults for the purpose of checking the scanner read rate. When activated, the test result is sent via RS232C and indicates the ration of the number of successful read to the total number of attempts. The test result is reported in the following format:

700 d OK: 93.5% *CODE-39 TEST*

Where:

♦700d indicates the number of times the decoder ran while scanning at 700 scans per second (the number can be lower than 700 with poor quality barcodes).

♦93.5% indicates the percentage of good reads to total attempts. T

♦The control character to be output is CR (0DE carriage return line fed), "ESC[3A" (cursor 3 line UP).

The predefined defaults are the following:

♦Reads all barcodes by symbology.

♦No fixed number of digits defined (32 digits max.).

♦Normal scan, multiple scan.

♦Trigger disabled.

♦Small and large.

♦Buzzer 3 KHz, volume max.)

♦Buzzer after decoding (10 ms).

♦Good LED after decoding (green 100 ms)

♦RS232C (9600 bps, 8, 1, np, no handshaking).

Page 27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Manual No -ULPNR101-03 February User’s ManualPage Contents Introduction and Getting Started Technical SpecificationsConfiguring the Scanner Scanner Servicing and MaintenanceSection Introduction and Getting Started Product Overview Quick Start-Up ProcedureSymbologies Supported Section Technical Specifications Physical SpecificationsOptical Specifications Tilt Rotation PitchRecommended operation α at + 60 degrees or less SkewLPR5627 Raster Pattern CurvatureRS232 Communications Specifications Electrical SpecificationsConnector Pin-outs Ordering Information Environmental SpecificationsModel Focal Distance Distance to the Bar CodeDepth-of-Field Avoiding Specular Reflection Measuring Scanner Performance How to perform the Read Rate TestQuality Bar Code Labels 700d OK 93.5% CODE-39 Test Tips for Insuring Highest Data Integrity Application Notes Tips for Achieving High ThroughputPresence/Absence of bar code Scanner Transmits Tips for Verifying the Presence of a Bar CodeParameter Factory Default Setting Section Configuring the ScannerProgramming Menus & Commands Default SettingsModified and/or Customized Scanners Common Causes of Poor PerformanceScanner Labeling Cdrh Class II Laser DevicePage Programming the Scanner ESC Computer Command CRWhat if you make a mistake? Reset All Defaults U1 Command U1Reset All Defaults Computer Function / Description CommandAppendix B Prefix/Suffix of Numeric Characters Enable character length Positive & Negative Bar Codes Motor Control Index Appendix CCommand Description Global Default & Scanner ConfigurationsGlobal Default & Scanner Configurations Page Symbology Selection Symbology Selection Add/Activate Specific Bar Code SymbologiesAdd/Activate Specific Bar Code Symbologies Disable all WPC Delete/Deactivate Specific Bar Code SymbologiesOptions for UPC Delete/Deactivate Specific Bar Code SymbologiesOptions for Code Options for Codabar NW-7 Codabar NW-7 Format Options for Interleaved 25 Format Standard and Interleaved Options for Iata Fixing the Number of Digits Disable fixationCreating a Prefix and/or Suffix UPC-A Setting Prefixes Identifying the SymbologySetting Prefixes Identifying the Symbology Setting Suffixes Identifying the SymbologySetting Suffixes Identifying the Symbology Direct Input of Numeric Characters Direct Input of Alpha Characters Direct Input of Control Characters Enable Number of Characters/Digits TransmittedEnable Number of Characters/Digits Transmitted Disable Number of Characters/Digits Transmitted Communication Parameters Disable Number of Characters/Digits TransmittedCommunication Parameters Unlimited HandshakingBuzzer Operation Disable buzzerBuzzer Operation Positive & Negative Bar Codes Setting the Trigger FunctionSelecting the Read Mode Trigger Function Enabled Trigger Function Disabled Selecting the Read ModeScanner Timeout Trigger Enabled Mode only Redundant Decoding Print Quality Adjustments Transmitting Error Indications Trigger Enabled onlyGood Read LED Operation Sequencer Controls Motor Controls Sequencer ControlsAppendix D Dimensional Drawings LPR5627 Raster Optical Performance typical unit Appendix E LPN5627 Optical Performance typical unit

LPN5627, LPR5627 specifications

The Opticon LPR5627 and LPN5627 are advanced barcode scanning devices designed for a wide range of applications in retail, logistics, and inventory management. These models from Opticon stand out due to their combination of versatility, durability, and cutting-edge technology.

One of the main features of the Opticon LPR5627 and LPN5627 is their exceptional scanning performance. With a high-speed processor and advanced imaging technology, these devices can capture various barcode formats, including 1D and 2D codes such as QR codes, Data Matrix, and PDF417. This versatility ensures that users can efficiently handle different types of products and services in dynamic environments.

Another noteworthy aspect of the LPR5627 and LPN5627 is their ergonomic design. The devices are lightweight and easy to maneuver, allowing for extended use without causing strain or discomfort. The intuitive button layout also simplifies the scanning process, enabling quick and efficient operation even for those unfamiliar with barcode scanners.

Durability is a key characteristic of these models. The Opticon LPR5627 and LPN5627 are built to withstand the rigors of daily use in busy environments. They feature a sturdy construction that can endure drops, dust, and moisture, ensuring reliable performance in various settings from warehouses to retail stores.

In terms of connectivity, these devices offer multiple options, including USB and Bluetooth. This flexibility allows for seamless integration with existing systems, whether it's directly connecting to a computer or wirelessly pairing with mobile devices. This adaptability helps businesses improve their operational efficiencies and enhance overall productivity.

Power management is another strong suit of the LPR5627 and LPN5627. Equipped with long-lasting batteries, these devices minimize downtime, allowing staff to focus on their tasks without interruption. This feature is particularly beneficial in high-demand situations where continuous scanning is essential.

Moreover, Opticon has integrated advanced software solutions into the LPR5627 and LPN5627, providing users with the tools needed for effective data management. These software options enable real-time inventory tracking, facilitating better decision-making and contributing to operational excellence.

In summary, the Opticon LPR5627 and LPN5627 barcode scanning devices are designed for high-performance scanning with a focus on durability, user comfort, and technological advancement. Their ability to scan a wide variety of barcode formats, coupled with features that enhance productivity, make them essential tools for businesses looking to streamline operations and improve efficiency in today's competitive landscape.
Top Page Image Contents