Opticon LPR5627 Selecting the Read Mode, Trigger Function Enabled Trigger Function Disabled

Page 58

Manual No. 25-ULPNR101-03; Feb, 2003

LPN5627 / LPR5627 Laser Fixed Mount

Scanner

 

24. Selecting the Read Mode (continued)

The operation of the scanner in the various read modes is described in the table below. The “Continuous Read” mode is helpful in positioning the scanner for optimum reading. In “Continuous Read,” the scanner’s buzzer functions like a Geiger counter, sounding the most active at the position achieving the greatest number of good reads.

Mode

Trigger Function Enabled

Trigger Function Disabled

 

After receiving a trigger pulse,

Scanner will read different bar codes

 

scanner will read multiple,

 

in succession if they are presented to

 

different bar codes in succession

Multiple

the read window.

Read

until it times out.

 

Scanner will not read the same

Scanner will not read the same bar

 

 

bar code twice if they are

 

code twice if they are consecutive.

 

consecutive.

 

 

Continuous

Scanner will read the same bar

 

code continuously after receiving

Scanner will read the same bar code

Read

a trigger pulse until scanner

continuously.

 

times out.

 

Single

Scanner will read only one bar

 

code after receiving a trigger

Same as Multiple Read mode, above.

Read

pulse.

 

 

 

 

 

 

Page 54

Page 57 Page 59
Image 58
Page 57 Page 59
Contents User’s Manual Manual No -ULPNR101-03 FebruaryPage Contents Scanner Servicing and Maintenance Technical SpecificationsConfiguring the Scanner Introduction and Getting StartedQuick Start-Up Procedure Section Introduction and Getting Started Product OverviewSymbologies Supported Section Technical Specifications Physical SpecificationsOptical Specifications Skew PitchRecommended operation α at + 60 degrees or less Tilt RotationCurvature LPR5627 Raster PatternRS232 Communications Specifications Electrical SpecificationsConnector Pin-outs Ordering Information Environmental SpecificationsModel Focal Distance Distance to the Bar CodeDepth-of-Field Avoiding Specular Reflection Measuring Scanner Performance How to perform the Read Rate TestQuality Bar Code Labels 700d OK 93.5% CODE-39 Test Application Notes Tips for Achieving High Throughput Tips for Insuring Highest Data IntegrityTips for Verifying the Presence of a Bar Code Presence/Absence of bar code Scanner TransmitsDefault Settings Section Configuring the ScannerProgramming Menus & Commands Parameter Factory Default SettingCommon Causes of Poor Performance Modified and/or Customized ScannersCdrh Class II Laser Device Scanner LabelingPage ESC Computer Command CR Programming the ScannerCommand Reset All Defaults U1 Command U1Reset All Defaults Computer Function / Description What if you make a mistake?Appendix B Prefix/Suffix of Numeric Characters Enable character length Positive & Negative Bar Codes Motor Control Appendix C IndexGlobal Default & Scanner Configurations Command DescriptionGlobal Default & Scanner Configurations Page Symbology Selection Add/Activate Specific Bar Code Symbologies Symbology SelectionAdd/Activate Specific Bar Code Symbologies Delete/Deactivate Specific Bar Code Symbologies Disable all WPCDelete/Deactivate Specific Bar Code Symbologies Options for UPCOptions for Code Options for Codabar NW-7 Codabar NW-7 Format Options for Interleaved 25 Format Standard and Interleaved Options for Iata Disable fixation Fixing the Number of DigitsCreating a Prefix and/or Suffix Setting Prefixes Identifying the Symbology UPC-ASetting Suffixes Identifying the Symbology Setting Prefixes Identifying the SymbologySetting Suffixes Identifying the Symbology Direct Input of Numeric Characters Direct Input of Alpha Characters Enable Number of Characters/Digits Transmitted Direct Input of Control CharactersEnable Number of Characters/Digits Transmitted Disable Number of Characters/Digits Transmitted Disable Number of Characters/Digits Transmitted Communication ParametersCommunication Parameters Handshaking UnlimitedDisable buzzer Buzzer OperationBuzzer Operation Setting the Trigger Function Positive & Negative Bar CodesSelecting the Read Mode Selecting the Read Mode Trigger Function Enabled Trigger Function DisabledScanner Timeout Trigger Enabled Mode only Redundant Decoding Transmitting Error Indications Trigger Enabled only Print Quality AdjustmentsGood Read LED Operation Sequencer Controls Sequencer Controls Motor ControlsAppendix D Dimensional Drawings Appendix E LPN5627 Optical Performance typical unit LPR5627 Raster Optical Performance typical unit

LPN5627, LPR5627 specifications

The Opticon LPR5627 and LPN5627 are advanced barcode scanning devices designed for a wide range of applications in retail, logistics, and inventory management. These models from Opticon stand out due to their combination of versatility, durability, and cutting-edge technology.

One of the main features of the Opticon LPR5627 and LPN5627 is their exceptional scanning performance. With a high-speed processor and advanced imaging technology, these devices can capture various barcode formats, including 1D and 2D codes such as QR codes, Data Matrix, and PDF417. This versatility ensures that users can efficiently handle different types of products and services in dynamic environments.

Another noteworthy aspect of the LPR5627 and LPN5627 is their ergonomic design. The devices are lightweight and easy to maneuver, allowing for extended use without causing strain or discomfort. The intuitive button layout also simplifies the scanning process, enabling quick and efficient operation even for those unfamiliar with barcode scanners.

Durability is a key characteristic of these models. The Opticon LPR5627 and LPN5627 are built to withstand the rigors of daily use in busy environments. They feature a sturdy construction that can endure drops, dust, and moisture, ensuring reliable performance in various settings from warehouses to retail stores.

In terms of connectivity, these devices offer multiple options, including USB and Bluetooth. This flexibility allows for seamless integration with existing systems, whether it's directly connecting to a computer or wirelessly pairing with mobile devices. This adaptability helps businesses improve their operational efficiencies and enhance overall productivity.

Power management is another strong suit of the LPR5627 and LPN5627. Equipped with long-lasting batteries, these devices minimize downtime, allowing staff to focus on their tasks without interruption. This feature is particularly beneficial in high-demand situations where continuous scanning is essential.

Moreover, Opticon has integrated advanced software solutions into the LPR5627 and LPN5627, providing users with the tools needed for effective data management. These software options enable real-time inventory tracking, facilitating better decision-making and contributing to operational excellence.

In summary, the Opticon LPR5627 and LPN5627 barcode scanning devices are designed for high-performance scanning with a focus on durability, user comfort, and technological advancement. Their ability to scan a wide variety of barcode formats, coupled with features that enhance productivity, make them essential tools for businesses looking to streamline operations and improve efficiency in today's competitive landscape.
Top Page Image Contents