Waves 2500 user manual Tone Section

Page 12
3.2 Tone Section

3.2 Tone Section

Knee

Sets the Knee, the manner in which the compressor begins to reduce the signal gain.

Range

Hard, Med, Soft

Default

Hard

Thrust

Sets the Thrust, a proprietary process that inserts a High Pass Filter at the RMS detector input, limiting compression response to lower frequencies while applying additional compression to higher frequencies.

Range

Loud, Med, Norm

Default

Norm

Type

Sets the Compression type, which determines the signal source being fed to the RMS detector.

Range

Feed Back, Feed Forward

Default

Feed Forward

Waves API 2500 User Manual

- 12 -

Image 12
Contents Waves API TABLE OF CONTENTS Chapter 1 - Introduction 1.1 Welcome1.2 Product Overview 1.3 Concepts and Terminology KneeThrust Type 1.4 Components Chapter 2 - Quickstart Guide Chapter 3 - Controls and Interface 3.1 Compressor SectionThreshold 3.2 Tone Section 3.3 Link Section L/R LinkShape 3.4 Meter Display Clip LEDSwitchable Display Modes Meters3.5 Output Section DefaultDefault AnalogDefault DefaultMake-Up Turns Auto Make-UpGain on and off4.2 Preset Handling Preset TypesChapter 4 - The WaveSystem 4.1 The WaveSystem ToolbarLoading Presets and Setups Saving Presets and SetupsPut into Preset Menu As… Save to New File…Deleting Presets 4.3 Interface ControlsA/B Comparison and Copying Toggle ButtonsValue Window Buttons SlidersHover Box Multiple Selection of ControlsPage Appendix A - API 2500 Controls