Waves 2500 user manual Loading Presets and Setups, Saving Presets and Setups, Save to New File…

Page 18
Loading Presets and Setups

Loading Presets and Setups

Click-and-holdon the Load button to see the Load pop-up menu. The menu is divided into four sections. If a section is not currently available it will not appear in the Load pop-up menu.

Open Preset File… Select to open any setup or preset file, whether from the Library or your own creations.

‘Filename.xps’: Displays any currently loaded Setup File and its presets.

Factory Presets: Displays the default Factory Presets.

User Presets: Displays any loaded User Presets.

Saving Presets and Setups

Click-and-hold on the Save button to see the Save pop-up menu. Four options are available. If an option is not currently available it will be grayed out and inaccessible.

Save to New File…

Select this to start a new Setup file. There are two prompts - first

 

for the setup filename, then for the preset name. You must provide

 

a name for both the setup file and the preset. Click OK (ENTER)

 

to complete the save. It is a good idea to create a folder in which

 

to save several setup files for a project.

Save ‘File Name’ – “Preset Name” Overwrites the settings of the loaded preset (whether a User

 

Preset or a preset from a Setup File) with the current settings. If a

 

Setup File is currently loaded, the name of the Setup File is

 

displayed followed by the name of the preset itself. If a User

 

Preset is loaded, its name is displayed.

Save to ‘File Name’ As…

Saves the current settings as a new preset into the Setup file that

 

is open (if one is not open, the option is grayed out). You will be

 

prompted to give the preset a name.

Put into Preset Menu As…

Save the current settings into a User Preset that will always be in

 

your Load menu (until deleted). You will be prompted to give this

 

preset a name. User Presets are stored in the plug-in’s preference

 

file.

Waves API 2500 User Manual

- 18 -

Image 18
Contents Waves API TABLE OF CONTENTS Chapter 1 - Introduction 1.1 Welcome1.2 Product Overview 1.3 Concepts and Terminology KneeThrust Type 1.4 Components Chapter 2 - Quickstart Guide Chapter 3 - Controls and Interface 3.1 Compressor SectionThreshold 3.2 Tone Section 3.3 Link Section L/R LinkShape Switchable Display Modes 3.4 Meter DisplayClip LED MetersDefault 3.5 Output SectionDefault AnalogMake-Up DefaultDefault Turns Auto Make-UpGain on and offChapter 4 - The WaveSystem 4.2 Preset HandlingPreset Types 4.1 The WaveSystem ToolbarPut into Preset Menu As… Loading Presets and SetupsSaving Presets and Setups Save to New File…A/B Comparison and Copying Deleting Presets4.3 Interface Controls Toggle ButtonsHover Box Value Window ButtonsSliders Multiple Selection of ControlsPage Appendix A - API 2500 Controls