IDE Channel 0 | None | Selecting ‘manual’ lets you set the remaining fields on this | |
screen. Selects the type of fixed disk. "User Type" will let | |||
Auto | |||
Master | you select the number of cylinders, heads, etc. Note: | ||
Manual | |||
| PRECOMP=65535 means NONE ! | ||
|
| ||
Capacity | Auto Display | Disk drive capacity (Approximated). Note that this size is | |
your disk drive | usually slightly greater than the size of a formatted disk | ||
| size | given by a disk checking program. | |
| CHS |
| |
Access Mode | LBA | Choose the access mode for this hard disk | |
Large | |||
|
| ||
| Auto |
| |
Cylinder | Min = 0 | Set the number of cylinders for this hard disk. | |
Max = 65535 | |||
|
| ||
Head | Min = 0 | Set the number of read/write heads | |
Max = 255 | |||
|
| ||
Precomp | Min = 0 | **** Warning: Setting a value of 65535 means no hard disk | |
Max = 65535 | |||
|
| ||
Landing zone | Min = 0 | **** | |
Max = 65535 | |||
|
| ||
Sector | Min = 0 | Number of sectors per track | |
Max = 255 | |||
|
|
3.4 BIOS Features Setup
This section allows you to configure your system for basic operation. You have the opportunity to select the system’s default speed,