Velodyne Acoustics CHT- 8Q, CHT-10Q, CHT-12Q, CHT-15Q Rear Panel Connections Detailed Explanation

Page 10

(2)SPEAKER LEVEL OUTPUT Terminals

Sends a crossed-over speaker-level signal to the front speakers. See below for a more detailed explanation of this crossover.

(3)IR INPUT

This is a connection that allows the utilization of a third party infrared remote sensor, such as Elan or Xantech, or an extended cable for placement closer to your other remote controlled equipment. This keeps you from awkward control angles using the infrared remote control.

(4)LINE OUTPUT

Connect these jacks to the LINE IN preamp input to use the DEQ-R’s internal high pass crossover. The signal fed from these connectors is rolled off below 120 Hz.

LINE INPUT/LFE

Connect these jacks to the LINE OUT preamp output, LFE output, or subwoofer output jacks of your receiver/processor. If using the LFE output from your receiver or processor, plug the single cable into the “L” – LFE input or, for more signal, use a “Y” connector (not included) and feed the signal into both “R” and “L” inputs.

(5)AUTO ON/OFF Switch

Use this switch to select between “stand-by” mode (woofer shuts off after eight minutes) and “always on” operation.

(6)VOLUME Control

This control allows you to balance the output from the subwoofer to the main speakers in your system. This control should be set to achieve similar volume level from between both the main speakers and subwoofer. When pressing volume up or down, set the level while watching the LED display for reference.

Note: Volume is also controllable by using the supplied remote. When defaults are restored, the default is 30 out of 80.

(7)LOW-PASS CROSSOVER

Use this knob to select the frequency above which you wish to cut off the signal to the subwoofer. When the knob is turned all the way to the left, the Subwoofer Direct feature is invoked and the subwoofer plays all frequencies up to 120 Hz.

Rear Panel Connections — Detailed Explanation

Your new subwoofer is equipped with both speaker-level and line-level inputs. Use the RCA/Phono type “INPUT” jacks when connecting your subwoofer to a pre-amp, signal processor, or line-level crossover. The “SPEAKER LEVEL INPUT” jacks connect directly to the speaker outputs of an integrated amplifier or receiver. Your amplifier section will notice no additional loading effects when you use these inputs because of their high impedance.

Note:

Do not use both the RCA/Phono “INPUT” connections and “SPEAKER LEVEL INPUT” connections simultaneously.

.w w w . v e l o d y n e . c o m

CHT-Q Series User’s Manual

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Series W . v e l o d y n e . c o m Table of Contents Prior to Installation N gr a t u l a t i o n sPr epar e for Installation PlacementInputs Volume Contr olS ta l l a t i o n Low pass Cr ossover 40 to 120 HzPhase Adjustment 0/90/180/270 Auto Tur n on FunctionFront Panel MIC JackSet up menu, make sure you select the large speaker option Rear Panel ConnectionsRear Panel Connections Detailed Explanation Speaker Level Output TerminalsLow Pass Cr ossover Subwoofer Dir ectRo s s ov e rs Receiver/Pr ocessor Subwoofer OutputsAmplifier Speaker-Level Subwoofer Connection Diagram A ge Interconnect CablesRemote Contr ol W . v e l o d y n e . c o m Musical Style Suggested Preset Care of Your Subwoofer Restoring DefaultsProtection Circuitry Troubleshooting and Service Specification s 115 Velodyne ProductsRegister. . . on Line . . . It’s faster . . . and easier Velodyne Acoustics, Inc
Related manuals
Manual 3 pages 47.73 Kb

CHT-10Q, CHT- 8Q, CHT-15Q, CHT-12Q specifications

Velodyne Acoustics is renowned for its innovative audio solutions, and the CHT series of subwoofers—namely the CHT-12Q, CHT-15Q, CHT-8Q, and CHT-10Q—showcase the company's commitment to delivering exceptional performance and immersive sound experiences. These subwoofers are designed to complement home theater systems and enhance music playback, ensuring that users enjoy deep, resonant bass without compromising clarity or precision.

One standout feature across the CHT series is the use of advanced digital signal processing (DSP). This technology allows for real-time adjustments to the audio output, optimizing performance based on the specific acoustics of the listening environment. The result is a tailor-made sound experience that delivers tight and controlled bass without distortion, even at high volume levels. Each model in the CHT series is equipped with a built-in amplifier that provides robust power and facilitates seamless integration with a range of audio systems.

The CHT-12Q and CHT-15Q are larger models designed for enthusiasts who crave powerful low-end performance. The CHT-15Q features a 15-inch driver that produces earth-shaking bass, making it an ideal choice for larger spaces or dedicated home theaters. On the other hand, the CHT-12Q, with its 12-inch driver, offers a balanced approach, delivering impressive bass response while being suitable for a variety of room sizes.

For those who have limited space but still desire quality sound reproduction, the CHT-8Q and CHT-10Q offer compact designs without sacrificing performance. The CHT-8Q features an 8-inch driver, making it perfect for smaller setups or apartments. Meanwhile, the CHT-10Q, equipped with a 10-inch driver, strikes a great balance between size and sound output, appealing to users with mid-sized rooms.

All models in the CHT series share a sleek design, ensuring they fit seamlessly into any home decor. They come equipped with various input options, including LFE and line-level connections, allowing for versatile integration with both traditional and contemporary audio systems. With their high-quality construction, powerful performance, and advanced technologies, Velodyne's CHT subwoofers are a smart choice for anyone looking to elevate their audio experience.
Top Page Image Contents