Quick Eagle Networks 4335 manual Access Router

Page 1

Main Benefits:

DiffServ-compliant QoS prioritizes and optimizes IP traffic flows for your critical applications

Dual T1/E1 for access redundancy, preventing a single cable cut from disrupting service

Ethernet WAN port for network access redundancy via DSL and Cable modem connections

Double bandwidth through standard-based dual T1/E1 Multilink Frame Relay (FRF.16.1) or MLPPP (RFC 1990)

Scalable networking with VLAN, static routing, RIP1, RIP2, OSPF, and BGP-4 protocols

Network Address Translation (NAT) for Internet access

Better throughput performance than many traditional routers due to integrated hardware and software architecture

The 4335 Access Router

A value-priced alternative for network redundancy and traffic prioritization.

Quick Eagle Networks’ 4335 Access RouterTM provides an all-in-one networking solutions to small businesses and remote offices. With the 4335 Access Router, you not only get the functions of an intelligent WAN access router, but also a Quality of Service (QoS) appliance, stateful inspection firewall, and CSU/DSU - all in a single, affordable device.

Especially the increasing deployment of business applications using IP is placing growing emphasis on efficient WAN bandwidth management at branch and remote office locations. Indeed, voice and data-over-IP services mandate capabilities far beyond traditional “best effort” routing. Therefore, today’s router must be able to manage congestion control and prioritize critical traffic over the “last mile” connection. Squeezing every last drop of performance from your router and therefore your broadband connection is vital in keeping your network costs under control.

With the 4335 Access Router’s optional standard-based DiffServ QoS (Differentiated Services/Quality Of Service) capability you are able to control and manage the bandwidth on your WAN connection, eliminating bottlenecks for your business- critical applications such as ERP and CRM. In addition, DiffServ QoS enables delay-sensitive voice and video-over-IP services, while dedicating enough bandwidth for lower priority traffic.

With PPP, PPPoE, PPPoFR, Frame Relay, Multilink Frame Relay, Multilink PPP, and MAC Bridging, Quick Eagle’s 4335 Access Router offers many cost-effective ways to connect branch-offices over leased lines, the Internet, IP-VPN, or corporate Frame Relay networks.

Business competitiveness depends more than ever before on the ability of the corporate network to provide continuous service. With the “last mile” being the most vulnerable point on the network, access redundancy is increasingly important. Whether you want to duplicate your T1/E1 access lines to eliminate the risk of a single cable cut disrupting your service, or take advantage of DSL and cable modem broadband services to backup your Frame Relay services with IP-VPN tunnels, network access redundancy is no longer a luxury. The 4335 Access Router directly addresses these concerns.

The ability to configure static routes, and one or more dynamic routing protocols like RIP1, RIP2, OSPF, and optional BGP-4, enables the router to link small and large enterprise networks. Static NAT, dynamic NAT, and overloading (NAPT) allows you to access the Internet using your own private IP address scheme.

Image 1
Contents 4335 Access Router Sophisticated product architecture Remote Site Common Features