Quantum Audio A-Series manual Data Cartridge Care and Maintenance, Always, Do not

Page 38

Data Cartridge Care and Maintenance

Chapter 3 Using Your Tape Drive

A-Series Data Cartridges

Observe the following precautions to protect your data:

Always:

• Remove the cartridge from the drive when not in use

 

and store it in its protective case.

 

• Avoid dropping the cartridge. This can damage

 

components inside the cartridge, possibly rendering

 

the tape unusable. If you drop a tape cartridge, open

 

the cartridge door and make sure that the leader pin

 

is in the correct position.

 

• Re-tension a dropped cartridge before using.

 

• Keep the cartridge away from:

 

• Direct sunlight and heat sources, such as

 

radiators, heaters, or warm air ducts.

 

• Sources of electromagnetic fields, such as

 

telephones, computer monitors, dictation

 

equipment, mechanical or printing calculators,

 

motors, magnetic tools, and bulk erasers.

 

 

Do not:

• Expose the cartridge to dirt, dust or moisture.

 

• Touch the tape media within the cartridge.

 

• Bulk erase Ultrium tape cartridges. LTO tape

 

cartridges have prewritten servo patterns that

 

cannot be reformatted by the tape drive. A bulk

 

erase operation would make them unusable.

 

• Use tape cartridges outside the specified operating

 

conditions: 10o C to 40o C, 20% to 80% relative

 

humidity.

 

If a tape cartridge has been exposed to conditions

 

outside the specified range, recondition the tape

 

before using in the operating environment by

 

exposing it to the operating environment for a time

 

equal to or greater than the time it was outside the

 

operating environment, up to a maximum of 24

 

hours. Then re-tension the tape to stabilize the tape

 

pack for better performance.

 

 

Quantum A-Series Tape Drives User’s Guide

22

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Series Tape Drives Copyright Statement Contents Using Your Tape Drive Appendix B Data Cartridges Appendix C Regulatory Compliance Figures Quantum A-Series Tape Drives User’s Guide Viii Tables Quantum A-Series Tape Drives User’s Guide Preface Document Organization Notational Conventions Quantum Corporate Headquarters Technical PublicationsQuantum Home Overview.html Quantum A-Series Tape Drives User’s Guide Xvi Introduction OverviewIntroduction Overview Capacity Product FeaturesSeries Maximum Storage Maximum Native Introduction Product Features Getting Started Java Plug-in Java Plug-in Certificate of SecurityResetting System Defaults Name Password/SettingSdlt 600A Drive Reset LTO-3A Drive Reset Safety Precautions Warranty NoteSafety, Handling, and ESD Protection Handling ESD, see Electrostatic Discharge ProtectionElectrostatic Discharge Protection Using Your Tape Drive Front Panel LEDs and Tape Eject Sdlt 600ALED/Button Color Port Title Symbol Action Explanation LEDSee the applicable data cartridge appendix for detailed LTO-3A This indication Signifies that the LED isEOT Series Data Cartridges Super DLTtape II Data CartridgeWrite-protect Switch on Super DLTtape II Data Cartridge Loading a Data Cartridge Sliding the write-protect Switch toward Enables data to beWrite Protecting an Ultrium Data Cartridge Unloading a Data Cartridge Loading a Super DLTtape II Data CartridgeDo not Data Cartridge Care and MaintenanceAlways Stage What You Observe Power On Self-Test Post TroubleshootingPost Operation Post Post Troubleshooting Tips If… Then… You should…Over Temperature Condition Frequently Asked Questions Specifications Series Sdlt 600A Tape Drive SeriesLTO-3A Tape DrivePivoting Optical Servo Series Sdlt 600A Tape DriveLaser Guided Magnetic Recording Magneto Resistive Cluster HeadsModular Design Sdlt 600A Tape Drive Modular Design Data Control Module Tape Control Module TCM PcbaPositive Engagement Tape Leader Buckling Mechanism Base PlateData Cartridge Receiver Front Panel ModuleElectronic Interface Module Super DLTtape II Data Cartridge Specification Product SpecificationsFunctional Specifications Performance DataShock and Vibration Specifications Shock Unpackaged Pulse Shape Square wave ½ sine pulseVibration Unpackaged Type Sine Sweep Shock Packaged Height Number Drop Drops Package WeightShock Unpackaged Type RandomShock Pulse Shape ½ sine pulse Vibration Packaged Type RandomType Sine, Sweep, and Dwell Vibration Type Sine SweepCurrent and Power Requirements ShockMax for Sdlt 600A tape Drive Modes9 DC Power AC Power W MaxPk1 Max3 Mode Typ2 Typ4 Sdlt 600A Tape Drive Recording Method Environmental SpecificationsTemperature Air Flow RequirementsStorage Unpacked or Specification Packed Shipping Limits Power OnSpecification Operating Limits No Tape Loaded Storage and ShipmentAltitude Recording Media SpecificationsCharacteristic Specification Media StructurePhysical Data Cartridge MediaOperating Conditions Media Shipping Operating, and Storage SpecificationsShipping Conditions Storage Conditions Archival Non ArchivalSeries LTO-3A Tape Drive Power SpecificationsDimension Value Drive Performance Specifications Specification ValueDrive Performance Specifications Specification Operational Non-operational Environmental RequirementsMean Time Between Failures Reliability SpecificationsSpecification Description Environmental Considerations LTO Cartridge SpecificationsMean Time to Replace Cartridge Memory Cartridge Reliability Using Data Cartridges for the Sdlt 600A Data CartridgesData Cartridge Handling Guidelines Super DLTtape Data CartridgeData Cartridge Handling Guidelines Data Cartridge Inspection Procedure Bottom View Super DLTtape II Data Cartridge Super DLTtape Data Cartridge Reel Locks Problems to Look for Inside the Data Cartridge Door Data Cartridge Write-Protect Switch After Loading the Data Cartridge and During Operation Loading a Tape Cartridge Unloading a Tape Cartridge Using Data Cartridges for the LTO-3AOrange Write-protect Switch Position Indicator Result Ultrium Tape Cartridge Write-Protect Switch Write Protecting a Tape CartridgeTape Cartridge Care and Maintenance Life Expectancy of the Cleaning Tape Cleaning the Tape MechanismOccasional Cleaning of Tape Head LTO-3A Cleaning the Tape Mechanism Performing an Emergency Reset and Cartridge Eject If there is Then the tape drive firmwareLoading a Data Cartridge Unloading a Data Cartridge Regulatory Compliance Sdlt 600A Immunity and ESD Limits Electromagnetic Interference SusceptibilityType Regulation/Certification Current Harmonics and Flicker Emissions TestsTest Required Test Name Specification Performance Acoustic Noise EmissionsLTO-3A Country Regulatory Organization Compliant toVcci 2006-04 Class B Environmental Compliance Perchlorate MaterialDisposal of Electrical and Electronic Equipment Glossary Java applets are small Java programs that get downloaded to Degree Celsius C is a unit of temperature European Economic Community EOD Gigabyte Glossary Glossary Prml PWA QEZ Universal Serial Bus is a serial bus standard for connecting Mandates that producers of electronic goods assume

A-Series specifications

The Quantum Audio A-Series represents a groundbreaking advancement in high-performance audio technology, offering audiophiles and casual listeners alike an exceptional listening experience. Designed with a focus on clarity, precision, and immersive sound, the A-Series integrates innovative features and cutting-edge technologies to elevate audio quality.

One of the most significant characteristics of the A-Series is its use of advanced digital signal processing (DSP). This technology allows for intricate control over sound dynamics, enabling precise tuning of the audio output. The A-Series employs a sophisticated algorithm that analyzes and adjusts sound frequencies in real-time, ensuring a balanced and true-to-source sound reproduction. This results in crisp highs, rich midrange, and deep, resonant bass that can be tailored to individual listening preferences.

The A-Series also incorporates proprietary driver technology, featuring custom-designed speakers that deliver outstanding efficiency and performance. These drivers are crafted to minimize distortion, ensuring that every note and subtle detail is rendered accurately. The high-frequency drivers are particularly notable for their ability to reproduce delicate sounds, creating a soundstage that is wide and enveloping.

In addition to superior acoustic performance, the Quantum Audio A-Series emphasizes versatility. Many models within the series come equipped with Bluetooth connectivity, allowing users to wirelessly stream music from their smartphones or other devices. This feature is complemented by high-definition audio codecs, which ensure that sound quality is preserved even during wireless transmission.

Another hallmark of the A-Series is its stylish and ergonomic design. The cabinets are crafted from high-density materials that not only reduce vibrations but also enhance the aesthetic appeal of the speakers. The sleek finish and modern lines make them a fitting addition to any contemporary space.

Furthermore, the A-Series integrates well with home automation systems, offering seamless control through mobile apps or smart devices. This feature provides convenient access to various audio settings, further personalizing the listening experience.

In summary, the Quantum Audio A-Series embodies a perfect blend of innovative technologies, captivating sound quality, and modern design. Its advanced DSP capabilities, proprietary driver technology, versatile connectivity options, and elegant aesthetics make it a compelling choice for anyone serious about their audio experience.
Top Page Image Contents