Quantum Audio A-Series manual LTO-3A

Page 82

Compatibility of the Cleaning Tape

Loading the Cleaning

Tape Into a Tabletop Tape

Drive

LTO-3A

Cleaning the Tape Mechanism

The SDLT CleaningTape is intended for use in SDLT 600A tape drives Alternatively stated, the SDLT CleaningTape only cleans the SDLT MRC heads.

Follow these steps to load an SDLT CleaningTape into an SDLT 600A tape drive:

1Insert the cleaning tape, with the Front Slide Label Slot facing outward, into the tape drive until the tape drive engages with the cleaning tape and begins to take up the cleaning media. The green Drive Status LED flashes and the cleaning cycle begins automatically.

2When the cleaning cycle completes, the cleaning tape automatically ejects from the tape drive and the yellow alert LED turns off.

Note: On the last cleaning, the cleaning tape will not eject. Use the Eject button on the front of the tape drive to eject the expired cleaning tape and dispose of the cleaning tape.

Remove the cleaning tape, place it back into its plastic case, and mark the label after each cleaning.

Excessive tape debris or other material can accumulate on the tape heads if the drive is:

•Used with non-approved media

•Operated in a hot, dusty environment

When this happens, the drive can experience excessive errors while reading or writing, and illuminate the amber Status LED continuously during operation. This means that the drive needs to be cleaned.

The LTO cleaning cartridge has the same dimensions as the tape cartridge and contains an LTO Cartridge Memory (LTO-CM), but is loaded with cleaning media instead of recording media. Always keep the LTO cleaning cartridge in its protective case when not in use.

To clean the A-Series LTO-3A tape drive:

1Load an LTO cleaning cartridge into the tape drive.

Quantum A-Series Tape Drives User’s Guide

66

Page 81 Page 83
Image 82
Page 81 Page 83
Contents Series Tape Drives Copyright Statement Contents Using Your Tape Drive Appendix B Data Cartridges Appendix C Regulatory Compliance Figures Quantum A-Series Tape Drives User’s Guide Viii Tables Quantum A-Series Tape Drives User’s Guide Preface Document Organization Notational Conventions Quantum Corporate Headquarters Technical PublicationsQuantum Home Overview.html Quantum A-Series Tape Drives User’s Guide Xvi Introduction OverviewIntroduction Overview Series Maximum Storage Maximum Native Product FeaturesCapacity Introduction Product Features Getting Started Java Plug-in Java Plug-in Certificate of SecurityResetting System Defaults Name Password/SettingSdlt 600A Drive Reset LTO-3A Drive Reset Safety, Handling, and ESD Protection Warranty NoteSafety Precautions Handling ESD, see Electrostatic Discharge ProtectionElectrostatic Discharge Protection Using Your Tape Drive Front Panel LEDs and Tape Eject Sdlt 600ALED/Button Color Port Title Symbol Action Explanation LEDSee the applicable data cartridge appendix for detailed LTO-3A This indication Signifies that the LED isEOT Series Data Cartridges Super DLTtape II Data CartridgeWrite-protect Switch on Super DLTtape II Data Cartridge Write Protecting an Ultrium Data Cartridge Sliding the write-protect Switch toward Enables data to beLoading a Data Cartridge Unloading a Data Cartridge Loading a Super DLTtape II Data CartridgeAlways Data Cartridge Care and MaintenanceDo not Post Operation Power On Self-Test Post TroubleshootingStage What You Observe Post Post Troubleshooting Tips If… Then… You should…Over Temperature Condition Frequently Asked Questions Specifications Series Sdlt 600A Tape Drive SeriesLTO-3A Tape DrivePivoting Optical Servo Series Sdlt 600A Tape DriveLaser Guided Magnetic Recording Magneto Resistive Cluster HeadsModular Design Sdlt 600A Tape Drive Modular Design Data Control Module Tape Control Module TCM PcbaPositive Engagement Tape Leader Buckling Mechanism Base PlateData Cartridge Receiver Front Panel ModuleElectronic Interface Module Super DLTtape II Data Cartridge Specification Product SpecificationsFunctional Specifications Performance DataShock and Vibration Specifications Shock Unpackaged Pulse Shape Square wave ½ sine pulseVibration Unpackaged Type Sine Sweep Shock Packaged Height Number Drop Drops Package WeightShock Unpackaged Type RandomShock Pulse Shape ½ sine pulse Vibration Packaged Type RandomType Sine, Sweep, and Dwell Vibration Type Sine SweepCurrent and Power Requirements ShockMax for Sdlt 600A tape Drive Modes9 DC Power AC Power W MaxPk1 Max3 Mode Typ2 Typ4 Sdlt 600A Tape Drive Recording Method Environmental SpecificationsTemperature Air Flow RequirementsStorage Unpacked or Specification Packed Shipping Limits Power OnSpecification Operating Limits No Tape Loaded Storage and ShipmentAltitude Recording Media SpecificationsCharacteristic Specification Media StructurePhysical Data Cartridge MediaOperating Conditions Media Shipping Operating, and Storage SpecificationsShipping Conditions Storage Conditions Archival Non ArchivalDimension Value Power SpecificationsSeries LTO-3A Tape Drive Drive Performance Specifications Specification ValueDrive Performance Specifications Specification Operational Non-operational Environmental RequirementsSpecification Description Reliability SpecificationsMean Time Between Failures Mean Time to Replace LTO Cartridge SpecificationsEnvironmental Considerations Cartridge Memory Cartridge Reliability Using Data Cartridges for the Sdlt 600A Data CartridgesData Cartridge Handling Guidelines Super DLTtape Data CartridgeData Cartridge Handling Guidelines Data Cartridge Inspection Procedure Bottom View Super DLTtape II Data Cartridge Super DLTtape Data Cartridge Reel Locks Problems to Look for Inside the Data Cartridge Door Data Cartridge Write-Protect Switch After Loading the Data Cartridge and During Operation Orange Write-protect Switch Position Indicator Result Using Data Cartridges for the LTO-3ALoading a Tape Cartridge Unloading a Tape Cartridge Ultrium Tape Cartridge Write-Protect Switch Write Protecting a Tape CartridgeTape Cartridge Care and Maintenance Occasional Cleaning of Tape Head Cleaning the Tape MechanismLife Expectancy of the Cleaning Tape LTO-3A Cleaning the Tape Mechanism Performing an Emergency Reset and Cartridge Eject If there is Then the tape drive firmwareLoading a Data Cartridge Unloading a Data Cartridge Regulatory Compliance Sdlt 600A Immunity and ESD Limits Electromagnetic Interference SusceptibilityType Regulation/Certification Current Harmonics and Flicker Emissions TestsTest Required Test Name Specification Performance Acoustic Noise EmissionsLTO-3A Country Regulatory Organization Compliant toVcci 2006-04 Class B Environmental Compliance Perchlorate MaterialDisposal of Electrical and Electronic Equipment Glossary Java applets are small Java programs that get downloaded to Degree Celsius C is a unit of temperature European Economic Community EOD Gigabyte Glossary Glossary Prml PWA QEZ Universal Serial Bus is a serial bus standard for connecting Mandates that producers of electronic goods assume

A-Series specifications

The Quantum Audio A-Series represents a groundbreaking advancement in high-performance audio technology, offering audiophiles and casual listeners alike an exceptional listening experience. Designed with a focus on clarity, precision, and immersive sound, the A-Series integrates innovative features and cutting-edge technologies to elevate audio quality.

One of the most significant characteristics of the A-Series is its use of advanced digital signal processing (DSP). This technology allows for intricate control over sound dynamics, enabling precise tuning of the audio output. The A-Series employs a sophisticated algorithm that analyzes and adjusts sound frequencies in real-time, ensuring a balanced and true-to-source sound reproduction. This results in crisp highs, rich midrange, and deep, resonant bass that can be tailored to individual listening preferences.

The A-Series also incorporates proprietary driver technology, featuring custom-designed speakers that deliver outstanding efficiency and performance. These drivers are crafted to minimize distortion, ensuring that every note and subtle detail is rendered accurately. The high-frequency drivers are particularly notable for their ability to reproduce delicate sounds, creating a soundstage that is wide and enveloping.

In addition to superior acoustic performance, the Quantum Audio A-Series emphasizes versatility. Many models within the series come equipped with Bluetooth connectivity, allowing users to wirelessly stream music from their smartphones or other devices. This feature is complemented by high-definition audio codecs, which ensure that sound quality is preserved even during wireless transmission.

Another hallmark of the A-Series is its stylish and ergonomic design. The cabinets are crafted from high-density materials that not only reduce vibrations but also enhance the aesthetic appeal of the speakers. The sleek finish and modern lines make them a fitting addition to any contemporary space.

Furthermore, the A-Series integrates well with home automation systems, offering seamless control through mobile apps or smart devices. This feature provides convenient access to various audio settings, further personalizing the listening experience.

In summary, the Quantum Audio A-Series embodies a perfect blend of innovative technologies, captivating sound quality, and modern design. Its advanced DSP capabilities, proprietary driver technology, versatile connectivity options, and elegant aesthetics make it a compelling choice for anyone serious about their audio experience.
Top Page Image Contents