Connecting PC as monitor
ENGLISH
Picture adjustment
You can adjust picture Contrast, Brightness, Horizontal/Vertical position,Clock, Phase, Auto and Reset as you prefer.
1.Press the TV/AV or TV/PC button to select the PC mode.
2.Press the MENU button.
3.Press the CHxy button to select the desired picture item.
4.Press the VOLÏqbutton to make appropriate adjustments.
Contrast
This function is to adjust picture to light/dark.
Brightness
This function is to adjust brightness of picture.
Temperature
Temperature is a measure of the warmth of the image color.
Horizontal Position/Vertical Position
This function is to adjust picture to left/right and up/down as you prefer.
Clock
Contrast
x
0 Ï 100 q 100
y
1024 X 768
AUTO | 48.4KHz | 60.0Hz |
|
▲▼ ◀▶ MENU TV/AV
PSM
TV/AV
CH
VOLVOL
This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change.
Phase
This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Auto
This function is for the automatic adjustment of the screen position, clock and clock phase. The displayed image will disappear for a few seconds while the Auto- configuration is in process
Note Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust our monitor’s position, clock and clock phase manually.
Reset
This function allows you to return to the good picture reproduction Programmed at the factory and cannot be changed.
Color
This function is to adjust intensity of the color.
*When DVI source is connected, Auto, Clock and Phase don’t operate.
*When DTV source is connected, you can adjust picture Contrast, Brightness, Color, Temperature, Horizontal Position/Vertical Position, Clock, Phase and Reset as you prefer.
CH
Contrast
x
0 Ï 100 q 100
y
1024 X 768
48.4KHz 60.0Hz
▲▼ ◀▶ MENU TV/AV
<The Picture adjustment of DTV mode>
27