MONTH
1.The month digit on LCD2 will start flashing (Default setting 1). Set the desired month by use of the + key.
2.Press and release the SET key to move to the mode “Date Setting”.
DATE
1.The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired date by use of the + key. Note: The date can only be set in conjunction with the selected month. For example, it is not possible to set the date 30 if the month of February is selected.
2.Press and release the SET key to move to “Weekday setting”.
WEEKDAY
1.The weekday symbols will be displayed on LCD2 in the
2.Press and release the SET key to enter the mode “12/24h Time Format Setting”.
12/24H TIME FORMAT
The time format can be display in 12h or 24h (Default setting “12h”).
1.The digits “12” or “24” will start flashing on LCD1. By use of the + key select 12h or 24h time format display.
2.Press and release the SET key to enter the mode “ºC or ºF Temperature Setting”.
°C OR °F TEMPERATURE
The temperature setting can be set to either to ºF or ºC (Default setting °F).
1.The characters “°F” or “°C” will start flashing on LCD1. By use of the + key select “°F” for temperature display in degrees Celsius or “°C” for degrees Fahrenheit.
2.Press and release the SET key to enter the mode “Solar Mode Setting”.
11
SOLAR MODE
The Solar Mode is used for saving the power consumption of the rechargeable battery (Default setting ON):
1.The characters “ON” or “OFF” will start flashing on LCD1. By use of the + key select “ON” or “OFF” to set the solar mode.
2.Press and release the SET key to exit the setting mode and switch back to the normal display mode.
If the solar mode setting is ON:
∙LCD will automatically turn OFF automatically if the environment is too dark
∙LCD will automatically turn ON automatically if the environment is bright enough; the surrounding environment brightness is checked every 5 seconds
∙No information will be displayed when the LCD is OFF, but all the settings and operations will remain, except for the temperature and humidity measurements.
If the solar mode setting is OFF:
∙LCD will remain ON constantly.
EXIT THE MANUAL SETTING MODES
∙To return to the normal display mode from anywhere in manual setting mode simply press the SNZ key anytime.
∙If no keys are pressed for at least 15 seconds in setting mode, the
ALARM
To enter into the alarm setting mode:
1.Hold the ALM key for 4 seconds. The hour digits start flashing.
2.Press and release the + key to set the hour.
3.Press and release the ALM key to set the minutes. The minute digits start flashing.
4.Press and release the + key to set the minutes.
12