La Crosse Technology WT-8029U Function Keys, LCD Screen Descriptions, Manual Settings

If the tower icon flashes, but does not set the time or the WWVB tower does not appear at all, then please take note of the following:

briefly before displaying the information for time, date, indoor temperature and indoor humidity.

Radio reception icon

∙	Recommended distance to any interfering sources like
	computer monitors or TV sets is a minimum of 6 feet (2
∙	meters).
	Within ferro-concrete rooms (basements,
	superstructures), the received signal is naturally
	weakened. In extreme cases, please place the unit close
	to a window and/ or point its front or back towards the
∙	Fort Collins, Colorado, transmitter.
	During nighttime, the atmospheric disturbances are
	usually less severe and reception is possible in most
	cases. A single daily reception is adequate to keep the
	accuracy deviation below 1 second.

WWVB time

Indoor temperature

Weekday Date

Alarm icon

Low battery icon (clock)

Indoor

humidity display

Note: In case the solar atomic clock is not able to detect the WWVB-signal (disturbances, transmitting distance, etc.), the time can be manually set (please refer to notes on Manual time setting).

FUNCTION KEYS

The radio-controlled clock has four easy to use keys:

SET key	: To enter into the set mode for the following
	functions: time zone, DST ON/OFF (daylight
	saving time), language, hour, minute, year,
	month, date, weekday, 12/24h time format
	display, ºF/ ºC temperature unit, and solar mode
+ key	: To change any values in manual set mode
ALM key	: To enter into the alarm set mode
	To activate/deactivate the alarm
SNZ key	: To activate the snooze function during alarm
	To exit manual setting modes

LCD SCREEN DESCRIPTIONS

The radio-controlled clock's LCD is divided into 2 sections and once the batteries are inserted, all the segments will light up

7

MANUAL SETTINGS

Note: If the radio-controlled clock has already successfully received the WWVB time signal and displays the correct time and date, then the Manual settings can be skipped.

After completion of the above described procedures in

“Setting-up”the manual setting modes can be entered by pressing the SET key. The following settings can now be programmed:

∙Time zone setting

∙DST ON/OFF

∙Language display setting

∙Manual time setting

∙Year setting

∙Month setting

∙Date setting

∙Weekday setting

∙12/24h time format display

∙ºF/ºC temperature setting

∙Solar mode setting

8