La Crosse Technology WS-6002U instruction manual Vicalendar Setting, VII 12/24-HOUR Setting

VI)CALENDAR SETTING

Note: When the WWVB signal is found, that date will over-ride the manually set date.

1)Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button 5 more times, until the default year “00” flashes in the date LCD.

2)Press and release the “+” button to select the year.

3)Press and release the “SET” button to confirm the year, and to set the month.

4)The default month “1” will flash. Press and release the “+” button to select the appropriate month.

5)Press and release the “SET” button to confirm the month, and to set the date.

6)The default date “1” will flash. Press and release the “+” button to select the appropriate date.

7)Press and release the “SET” button to confirm the date, and to set the weekday.

8)The default weekday “MON” (depends on selected language) will flash. Press and release the “+” button to select the appropriate weekday.

9)Press and release the “SET” button to confirm the calendar settings, and to advance to select either 12 or 24-hour time display.

VII) 12/24-HOUR SETTING

1)Hold down the “SET” button for 2 seconds (the selected time zone will flash), press the “SET” button 9 more times, until the “12” hour time display flashes in the time LCD.

2)Press and release the “+” button to toggle between 12 and 24 hour time.

3)Press and release the “SET” button to confirm the 12/24-hour time display, and to advance to select either °F or °C.

Note: The “24 hour time” option is not recommended. The LCD display will not show the first digit “2”.

9