Ultra electronic 3503-1002, 3503-1004 Cleaning the Optics, Cleaning the Magnetic Head if fitted

Page 38

Quick Start Guide

Ultra Electronics Card Systems

Cleaning the Optics

1.Using a small, soft lens brush, gently remove dust and debris from the visible mechanism and the brushstrips. Ensure the two light emitting diodes (LED's) adjacent to the Thermal Printhead, are clean and not obscured.

2.Check that the two apertures to the two optical sensors (one is 3mm diameter, the other is a fine slit in a stainless steel strip) are not obscured by debris.

Cleaning the Magnetic Head (if fitted)

1.The Magnetic Head is located beneath the card, between the thermal printhead and the front pinch rollers. To clean the Magnetic Head, manually insert the Cleaning Card into the mechanism and withdraw several times until the head is clean.

CAUTION Take great care not to scratch the surface of the magnetic head with any sharp or abrasive material.

Page 38

MAGICARD Sprinter Flip

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Magicard Sprinter Flip Verify computer-to-printer operation Unpack and install the printerLoad the supplied Windows Driver software ConventionsPreparing a Location For the Printer Location Requirements for your printerTop Cover Removing the Printer from the Box Checking the C Package Contents Power Cord with Molded Plug for your Country Magicard Sprinter Flip Install the D Dye Film Magicard Sprinter Flip Magicard Sprinter Flip Magicard Sprinter Flip Load the Plastic Cards Magicard Sprinter Flip Close the Printer Door Ensure that it is fully seated Connect the Printer To a Power Supply Test the G Printer Operation Install the parallel Interface Cable Install Windows Driver Procedure to be followed if your PC uses Windows 3.1 orMagicard Sprinter Flip Magicard Sprinter Flip Close the Control Panel window Install the Iy Windows Driver Procedure to be followed if your PC uses WindowsSelect the Next button Select the Have Disk button Magicard Sprinter Flip Magicard Sprinter Flip Magicard Sprinter Flip Printer Setup Printer SetupPaul Hare Image Aspect Tab Image Color Format / Film Tab Image Paul Hare Overcoat Tab Image About Verifying Computer to Printer K Communication in Windows For Further Assistance Check the InstallationCase Difficulty Important Cleaning M Procedures Thermal Printhead CleaningCleaning the Tacky Roller Cleaning the Rubber RollersMagicard Sprinter Flip Cleaning the Optics Cleaning the Magnetic Head if fittedCanadian Department of Communications Statement Limited Warranty Information EC Declaration of Conformity EMCMagicard Sprinter Flip

3503-1002, 3503-1004 specifications

Ultra Electronics 3503-1004 and 3503-1002 are advanced communication systems designed to meet the stringent demands of various military and defense applications. These two models stand out due to their robust features, cutting-edge technologies, and distinct characteristics that enhance operational effectiveness.

Both the 3503-1004 and 3503-1002 employ state-of-the-art technology to ensure secure and reliable communications in challenging environments. They utilize frequency-hopping spread spectrum techniques, which enable them to operate over a wide frequency range. This capability not only enhances signal integrity but also mitigates the risks of jamming and interception, making them ideal for tactical operations.

One of the main features of these models is their high data rate capability. The systems can support multiple channels simultaneously, allowing for efficient transmission of voice, video, and data. This feature is crucial for modern military operations that require seamless interoperability between different units and platforms.

The 3503-1004 model is particularly noted for its extended operational range. Leveraging advanced modulation schemes, it can transmit signals over long distances while maintaining clarity and minimal latency. This is essential for units operating in dispersed formations or in remote areas where traditional communication systems may falter.

On the other hand, the 3503-1002 is optimized for portability and ease of deployment. Weighing significantly less than conventional communication systems, it can be rapidly set up by operators in the field. This mobility is complemented by its battery-efficient design, which extends operational time and reduces the need for frequent recharging.

Both models feature robust encryption protocols to ensure mission-critical communications remain clandestine. The use of sophisticated algorithms guarantees that transmitted information is protected against unauthorized access, which is vital in today’s warfare landscape.

In summary, Ultra Electronics 3503-1004 and 3503-1002 embody the future of tactical communications with their high data rates, secure transmission, extended range, and portability. These characteristics make them indispensable tools for military personnel striving to maintain an edge in modern combat scenarios. As technology continues to evolve, these systems represent a significant leap forward in ensuring that communication remains reliable, secure, and effective in the theater of operations.
Top Page Image Contents