Installation
4Press the 
button, located on the bottom side of the main unit to turn the monitor on, then turn the computer on. If the monitor displays an image, the monitor is successfully installed. If no image is displayed, check all connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or damage.
NOTE:
The 
button is used for switching the LCD monitor on and off, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket.
NOTE:
The LED indicator is green when the monitor operates normally and will turn to amber when in power saving mode. When the monitor is off, the LED turns dark.
ENGLISH
Xerox© LCD Monitor User’s Manual | 13 |