Proview XM7-19w manual Troubleshooting, Monitor will not turn on, No picture

Page 32

Technical Information

Troubleshooting

Before consulting service personnel, check the following chart for a possible cause and solution to the trouble you are experiencing.

Monitor will not turn on

•Make sure the power cord is plugged in.

No picture

•Make sure the power cord is plugged in.

•Check the signal cable connecting the LCD monitor and the computer (refer to page 12-15).

•Press the button on the front panel of the monitor.

Poor picture or abnormal picture

•Check the signal cable connecting the LCD monitor and the computer (refer to page 12-15).

•Press the MENU button to adjust the Brightness Contrast option in the OSD.

•Adjust the Color Select option in the OSD.

•Press the AUTO button on the front panel of the monitor, to automatically adjust the display mode.

Out of range message appears

•Press the AUTO button on the front panel of the monitor, to automatically adjust the display mode.

•Press the MENU button to adjust the V Position, H Position and H Size options in the OSD.

•If using Windows 9X/2000/XP, wait a few seconds; once Windows detects the problem, a dialog will appear allowing you to manually set up the video mode according to the preset mode timing chart (refer to page 27).

ENGLISH

Xerox© LCD Monitor User’s Manual

31

Page 31 Page 33
Image 32
Page 31 Page 33
Contents LCD Monitor By Xerox Corporation. All rights reserved Table of Contents Recycling Place EuropeCE Marking Declaration Of Conformity Federal Communications Commission FCC Statement Important Safety Instructions On next Collection service Features IntroductionPackage Contents Front View and Controls English MenuInstallation Connecting Your LCD Monitor to a ComputerSUB only SUB/1 DVI Method 2 Digital DVI Connection HOW to GET Support for Your Wide SCREEN? Using Your LCD Monitor OSD Menu First, release the LCD monitor’s stand lock Next, adjust the height of the stand’s post 30oUsing the OSD Menu OSD MenuOSD Options Picture Menu Advanced Menu Mute VolumeAudio Menu Osd v. position Options MenuOsd h. position Osd timeout Utilities MenuOsd background LanguagesPreset Mode Timing Chart Technical InformationDVI Connector PIN Assignment PIN DescriptionSUB Connector PIN Assignment Permanently unlit or lit pixels Plug and PlayVisual Inspection Troubleshooting Monitor will not turn onNo picture Poor picture or abnormal pictureSpecifications ModelAuthorized Service Centers 281 281 530-4104 Fax Hours 8AM ~ 6PM Central Time
Top Page Image Contents