Technical Information
Troubleshooting
Before consulting service personnel, check the following chart for a possible cause and solution to the trouble you are experiencing.
Monitor will not turn on
•Make sure the power cord is plugged in.
No picture
•Make sure the power cord is plugged in.
•Check the signal cable connecting the LCD monitor and the computer (refer to page
•Press the POWER/
button on the front panel of the monitor.
Poor picture or abnormal picture
•Check the signal cable connecting the LCD monitor and the computer (refer to page
• Press the button to adjust the Brightness Contrast options in the OSD.
•Adjust the Color Select option in the OSD.
•Press the 
button on the front panel of the monitor, to automatically adjust the display mode.
Out of range message appears
•Press the 
button on the front panel of the monitor, to automatically adjust the display mode.
•Press the 
button to adjust the V Position, H Position and H Size options in the OSD.
•If using Windows 9X/2000/XP, wait a few seconds; once Windows detects the problem, a dialog will appear allowing you to manually set up the video mode according to the preset mode timing chart (refer to page 29).
ENGLISH
Xerox© LCD Monitor User’s Manual | 33 |