Proxim 70443r2 manual Unpack the Shipping BOX Contents

Page 3

Tsunami QuickBridge II T1/E1 Quick Install Guide

STEP 2. UNPACK THE SHIPPING BOX CONTENTS

The product’s shipping boxes should be left intact and sheltered until arrival at the installation site. Carefully unpack the Tsunami QuickBridge II shipment and check for any shipping damage or missing parts. There are two sets of equipment in the box, as displayed in the following figure.

The Tsunami QuickBridge II T1/E1 Quick Install Guide and a Documentation and Software CD also are included in the shipment. (Extra screw-on caps to seal unused connector ports are also provided.)

Contact Technical Support regarding any missing or damaged parts.

Notes:

(1)If the shipping container shows signs of damage, immediately notify the transportation company. Upon receipt, inspect contents to ensure no parts are missing or damaged.

(2)Save the original shipping boxes to re-use for shipping the equipment back to the factory, for storage, or for re-shipping the equipment to another location.

Copyright © 2005 Proxim Corporation. All rights reserved.

3

Image 3
Contents Tsunami QuickBridge II T1/E1 Version Quick Install Guide Gather Required Tools and Materials IntroductionUnpack the Shipping BOX Contents Pre-Assemble Mounting Hardware PRE-ASSEMBLE HardwareConnect the Cables Tsunami QuickBridge II T1/E1 Quick Install Guide Test Radios BACK-TO-BACK Install the Software SET UP for Configuration Selecting a Location Mount the Radio OutdoorsMounting the Radio to a Pole Mounting the Radio to a Flat SurfaceAlign the Radios Establishing a Connection Configuring SettingsTsunami QuickBridge II T1/E1 Quick Install Guide Reviewing the Master UNIT’S Status Technical Support Enhanced Warranty Packages