Proxim 70443r2 manual Install the Software

Page 8

Tsunami QuickBridge II T1/E1 Quick Install Guide

POLYPROPYLENE

FIBER SOUND

ABSORPTION PAD

STEP 6. INSTALL THE SOFTWARE

The QuickBridge II includes configuration software (the QuickBridge Manager), which provides basic setup and operating capabilities. Before installing the software, be sure you have configured the radios as described in “Step 4. Connect the Cables.”

Note: Install a copy of the QuickBridge Manager on any PC from which you want to control a radio.

To install the QuickBridge Manager:

1.Insert the supplied CD into the PC’s CD-ROM drive. Locate the CD-ROM’s Windows folder and the install program, install.exe. Double-click install.exe to start the installation program. Your browser may display the Security Warning screen; if so, click Yes to continue.

2.The Introduction window is displayed; click Next to continue.

3.The License Agreement screen is displayed. After reading and agreeing to the terms, select “I accept the terms of the license agreement,” then click Next to continue.

Copyright © 2005 Proxim Corporation. All rights reserved.

8

Image 8
Contents Tsunami QuickBridge II T1/E1 Version Quick Install Guide Introduction Gather Required Tools and MaterialsUnpack the Shipping BOX Contents PRE-ASSEMBLE Hardware Pre-Assemble Mounting HardwareConnect the Cables Tsunami QuickBridge II T1/E1 Quick Install Guide Test Radios BACK-TO-BACK Install the Software SET UP for Configuration Mount the Radio Outdoors Selecting a LocationAlign the Radios Mounting the Radio to a PoleMounting the Radio to a Flat Surface Configuring Settings Establishing a ConnectionTsunami QuickBridge II T1/E1 Quick Install Guide Reviewing the Master UNIT’S Status Enhanced Warranty Packages Technical Support