Wharfedale MP 1200 manual Specifications, Frequency Response

				POWER AMPLIFIER
Specifications
	RATED OUTPUT POWER	MP 1200		MP 1800
	Stereo mode , EIA: Bothe Channels Driven
	8Ω(1%THD)	260 W x 2		330W x 2
	4Ω(1%THD)	400 W x 2		600 W x 2
	2Ω(1%THD)	640 W x 2		900 W x 2
	Bridged mono, mode
	8Ω(1%THD)	800 W		1200 W
	4Ω(1%THD)	1280 W		1800 W
	INPUT SENSITIVITY & IMPEDANCE:
	@ rated output power,4 ohms	0.775 V		0.775 V
	Unbalanced, 1/4 hone jack	10Kohms		10Kohms
	Balanced , XLR	20Kohm		20Kohm
	VOLTAGE GAIN	35dB		35dB
	SLEW RATE:8Ω full swing
	Stereo	>30v/	sec	> 30v/	sec
	Bridged mono, mode	> 50v/	sec	> 50v/	sec
	CHANNEL SEPARATION:	76dB		76dB
	SIGNAL TO NOISE(20Hz-20KHz)	>100dB		>100dB
	DISTORTION: (SMPTE-IM)	less then 0.01%		less then 0.01%
	FREQUENCY RESPONSE:
	(+/-1dB) @ rated output, 4 ohms	20Hz-20KHz		20Hz-20KHz
	(+/-1dB) @ rated output, 4 ohms	5Hz-50KHz		5Hz-50KHz
	DAMPING FACTOR: (8 ohms, 1 KHz)	Greater then 300		Greater then 300
	TOPOLOGY	AB		AB
	CONNECTORS:	XLR and1/4,, TRS		XLR and1/4,, TRS
	Input
	Output	5 way binding posts or Neutrik Speakon		5 way binding posts or Neutrik Speakon
	CONTROLS
	Front	AC switch, CH.1 and CH.2 gain knobs		AC switch, CH.1and CH.2 gain knobs
	Real	Stereo/Briding mode switch		Stereo/Briding mode switch
	INDICATORS	Power switch on/off mute, Short circuit, Open		Power switch on/off mute, Shortcircuit ,Open
		Circuit, Thermal		circuit, Thermal
	COOLING	Continuously vasriable-speed fan		Continuously vasriable-speed fan
	WEIGHT
	Gross Weight	23Kg		25Kg
	Net Weight	21.5Kg		23.5Kg
	DIMENSION(HxWxD)	480x360x150(mm)		480x360x150(mm)

Specifications and design subject to shange without notice for improvements.

5MP 1200/1800