Ramsey Electronics TCCI-1 manual Troubleshooting, MD Rcplus CD Rcplus Ccopy A\RCPLUS

We have included a copy of the RC-Plus shareware radio control program on our HamBase demo diskette. This program will be found in the directory \RCPLUS. To use the program, copy all the files in the directory to your hard disk, or to a different disk by typing :

C:> MD RCPLUS

C:> CD RCPLUS

C:>COPY A:\RCPLUS\*.*

(If copying from A drive, type COPY B ....,

if copying from B drive, type COPY A ....)

To print the document type:

C:>\RCPLUS>PRINT RCPLUS>DOC

To run the program type:

C:>\RCPLUS>RCPLUS

F1 will give you outline help. ALT-Swill allow you to specify your radio. If you have trouble uderstanding the above, we suggest that you contact a local computer user to help you.

TROUBLESHOOTING:

If the interface appears not to be working, here are some things to try:

❒1. If the interface controls the radio in any way rest assured that it is operating correctly and a software bug is to blame.This means that the cable is not at fault.

❒2. Check all connections for proper fit.

❒3. Check that the correct radio is selected in your software.

❒4.Check the serial port and it’s properties.

❒5. Check the radio parameters and DIP switches (if any).

❒6. Remove any TSRs that may conflict with your serial ports.

❒7.Try using a different serial port.

❒8. If you have more than two serial ports on your computer, check for IRQ conflicts.

TCCI-1 • 7