English, Installation | Trust Computer Products 15694 instruction

Product information

C: Tablet mode buttons / indicators :

PowerU:U On = Active; Blinking = Stand-by (pen in sleep mode or out of range)

ScrollU:U On = Wheel → turn to scroll; Wheel button → click for horizontal/vertical scroll change.

ZoomU:U On = Wheel → turn to zoom in/out; Wheel button → click and hold for hand tool.

VolumeU:U On = Wheel → turn to increase/decrease sound; Wheel button → click for mute.

WideU:U On = Work area set to wide monitor format (D)

4:3U U : On = Work area set to 4:3 monitor format (E)

Installation

1Place CD in CD-ROM. Install driver.

Windows Vista: Allow and execute all necessary actions.

2Follow website instructions.

Windows Vista: Allow and execute all necessary actions.

2Follow setup instructions. Restart computer.

3Connect USB. Wait until Windows completes installation automatically.

4(A) Pull off pen cap. Take off battery cover. (B) Insert battery. Close battery cover and cap.

5Right click tablet icon and select “Hotkey”.

6Open pull-down menu to change hotkey profile.

7To create custom profile: Click “New”.

8Insert profile name. Click browse button.

9Select corresponding executable file from list. Click “OK” twice.

10Click hotkey button. Select new hotkey from list.

Default hotkeys from pre-set profiles cannot be changed.

11Enable “Setting”. Insert hotkey name.

12Define hotkey: (A) key combination, or (B) link (on local machine, network or internet).

Repeat 11 - 13 to add / define more hotkeys.

13Click “Confirm” and “OK”.

14Right click tablet icon and select “Pen Pad”.

Configure (1) Measurement unit: “inch” or “cm”. (2) Tracking mode: “absolute” (pen location on tablet

15corresponds to pointer location on screen) or “relative” (pen works like mouse).

Windows Vista: “Tablet mode” default setting is “Graphic mode”. Click “Buttons”:

16Configure: (1) Side buttons. (2) Pen Offset Value (only necessary if tablet encounters difficulties finding the pen). (3) Pen pressure. Click “OK”.