Product Safety Precautions
Follow all warnings and instructions marked on the product.
Do not use this product near water.
This display should be installed on a solid horizontal base.
When cleaning, use only a neutral detergent cleaner with a soft damp cloth. Do not spray with liquid or aerosol cleaners.
Do not expose this display to direct sunlight or heat. Hot air may cause damage to the cabinet and other parts.
Adequate ventilation must be maintained to ensure reliable and continued operation and to protect the display from overheating. Do not block ventilation slots and openings with objects or install the display in a place where ventilation may be hindered.
This display should be operated from the type of power source indicated on the AC/DC adapter.
Do not install this display near a motor or transformer where strong magnetism is generated. Images on the display will become distorted and the color irregular.
Do not allow metal pieces or objects of any kind fall into the display from ventilation holes.
Do not attempt to service this unit yourself. Removal of the display cover may expose you to dangerous voltage or other risks. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel in the event that:
1.Liquid is spilled into the product or the product is exposed to rain or water.
2.The product does not operate normally when the operating instructions are followed.
3.The product has been dropped or the cabinet has been damaged.
4.The product exhibits a distinct change in performance, indicating a need for service.
5.Power cord or plug is damaged or frayed.
General specifications for the LCD
The following items are neither defects nor failures.
Response time, luminance and color gamut may be changed by ambient temperature.
The LCD may be seemed luminance uniformity, flicker, vertical seam and/or small spot by display patterns.
Optical characteristics ( e.g. luminance, display uniformity, etc. ) gradually is going to change depending on operating time, and especially low temperature, because the LCD has cold cathode fluorescent lamps.
Page 21