Tote Vision LCD-1700VRQ manual Control Functions

Page 9

17” Quad display LCD monitor ______________________

CONTROL FUNCTIONS

The OSD control functions of 17” Quad display LCD monitor are located on the lower side. They are shown in the figure below and described in the following paragraphs.

Menu ∇ Δ - +

AV/PC Menu ?/CH1 ?/CH2 -/CH3 +/CH4 =/AUTO

The first line is used for RGB OSD adjustment

The second line is used for security OSD adjustment

AV/PC: Switch the Screen between RGB and security screen.

The RGB control key description:

1. : Power Switch

2./+ : Decrement/Increment or Volume control

3./Δ : Cursor Up/Down or Brightness control

4.MENU: Activate the on screen display function

As the security control key definition, please see the chapter 4.

7

Image 9
Contents Page Page RGB Mode Before Installing Your MonitorIntroduction About Your MonitorFACTORY-PRESET Modes Vesa DDC 1/2B SpecificationsEMI Product Package Installing the Monit orFollow These Steps to Install the Monitor Control Functions Adjustment Procedure Adjusting the PC MonitorOSD SCREEN1 Auto Adjustment H-POSITION255 OSD SCREEN2Adjustment Icon Vertical & Horizontal Position Adjustment Brightness Adjustment Understand the Display Resolution Setting Adjustment Procedure Adjusting the Security Screen SettingSystem Setup Format YY-MM-DD Date Setup Menu System Camera Alarm Playback VersionTime DwellCH1 CH2 CH3 CH4 PB OUT PWR PW Alarm Setup Audible OFF/ONPage Appendix RGB Signal Connector