Sennheiser ew 300IEM G3 Building Blocks of a Wireless System, Transmitter, Receiver, Antennas

Page 5

The Building Blocks of a Wireless System

Every wireless system consists of three main components:

1) Transmitter

The transmitter accepts a (mic or line) input signal, converts it into an RF (radio frequency) signal, and then transmits it.

G3 sKm Handheld Transmitter

G3 sKp plug-On Transmitter

G3 sK Bodypack Transmitter

2) Receiver

The receiver picks up the transmitted RF signal, converts it back into an audio signal, and then outputs it for mixing and amplification.

G3 em Rack-mount Receiver

G3 eK Camera-mount Receiver

3) antennas

Antennas handle the sending and receiving of the RF signal between the two components. Antennas may be either active or passive, depending on the system configuration.

a1031-u

a2003-uHf

passive Omnidirectional

passive directional

uHf antenna

uHf antenna

www.sennheiserusa.com/G3 5

Image 5
Contents Working with Applicable for USE in the U.S Consumer Alert Table of Contents About UHF Wireless Welcome to evolution wireless G3Transmitter Building Blocks of a Wireless SystemReceiver AntennasHandheld transmitters TransmitterBodypack transmitters Plug-on transmittersPortable camera-mount receivers ReceiverFixed rack-mount receivers Omnidirectional antennas AntennasDirectional antennas Active antenna distributionRack-mount Transmitter Wireless Monitoring SystemsPortable Receiver Antennas / Antenna CombinersChoosing a Wireless System RMS 1 Remote Mute Switch Accessorizing a Wireless SystemSelecting Systems and Components GA3 Rack AdapterOperation Frequency Considerations Easy Setup / Scan New ListPutting Together a System Four Channel Wireless SystemEight Channel Wireless System Single Channel Wireless Monitor System G3 Omni KIT Antenna Distribution and Mounting PackagesCan I use rechargeable batteries? Frequently Asked QuestionsConclusion What is cable emulation?Appendix Frequency Preset Charts Frequency Range a 516-558 MHz Bank Frequency Range G 566-608 MHz Frequency Range G 566-608 MHz Frequency Range B 626-668 MHz Frequency Range B 626-668 MHz Page Page Sennheiser Electronic Corporation

ew 300IEM G3 specifications

The Sennheiser ew 300IEM G3 is a professional in-ear monitoring system designed for musicians and performers seeking high-quality sound and reliable performance during live events. As part of Sennheiser's renowned evolution wireless series, this system features several advanced technologies and characteristics that enhance the listening experience and ease of use for users.

One of the standout features of the ew 300IEM G3 is its excellent audio quality, delivered through a wide frequency response ranging from 5 Hz to 18 kHz. This broad range ensures that both low and high frequencies are accurately reproduced, allowing performers to hear their mix in incredible detail. The system is equipped with a powerful UHF transmitter that offers exceptional transmission stability, even in complex RF environments. This ensures that users experience minimal dropouts or interference, critical for effective in-ear monitoring during performances.

Another significant aspect of the ew 300IEM G3 is its versatility. The system supports up to 16 compatible frequencies, enabling multiple systems to operate simultaneously without conflict. This is especially useful in larger settings, such as concerts or festivals, where multiple performers may require monitoring at the same time. The wireless range of up to 100 meters allows performers the freedom to move around the stage without being tethered to a wired system.

The ew 300IEM G3 also incorporates an intuitive setup process, thanks to its user-friendly interface and easy-to-navigate menu. The clear LCD display provides real-time information on battery life, frequency settings, and signal strength, allowing users to monitor their system effectively. The built-in diversity reception minimizes the risk of dropouts, as the receiver alternates between two antennas for the best signal quality.

Comfort is paramount for in-ear monitoring, and Sennheiser addresses this with customizable in-ear buds that fit snugly, ensuring effective passive noise isolation. The system supports a variety of ear tips and accessories, allowing users to find the perfect fit for their ears.

In conclusion, the Sennheiser ew 300IEM G3 is an exceptional in-ear monitoring solution tailored for live performances. With its superior audio quality, solid RF performance, and user-friendly features, it stands out as a trusted choice for audio professionals and musicians alike. Whether on stage or in the studio, the ew 300IEM G3 provides an immersive listening experience that enhances any performance.