3: Operation
Operator Control Panel (OCP)
Wireless Settings Menu
Main Menu
RETURN WITHOUT SAVE
SAVE SETTINGS
RADIO CONTROL
SETUP WIZARD
DHCP MODE
SET IP ADDRESS
SET SUBNET MASK
SET DEFAULT GATEWAY
SET DEFAULTS
Enable or disable the Radio.
Connect your wireless printer to a wireless network via the Wireless Setup Wizard.
Enable or disable the DHCP.
Set the IP Address.
Set the Subnet Mask.
Set the default Gateway (GW).
Set the Defaults.
Network Settings Menu
UP DOWN SELECT
•Press the UP button to move up the menu list
•Press the DOWN button to move down the menu list
•Press the SELECT button to select the item from the list
To configure the printer for wireless printing, refer to the Zebra ZXP Series 8 Card Printer Wireless Reference Manual, P/N
Zebra ZXP Series 8 Card Printer User’s Manual | 63 |
