Zebra Technologies 8 user manual Encoder Macro Commands

E: Magnetic Card Encoder

Encoder Macro Commands

With ZXP Series 8 printers, we provide support for pass-through mag encoding commands.

The application developer or user can use a preamble or Macro to indicate to the driver that the data following the Preamble or Macro is to be mag encoded.

The user can have encoding and printing data on the same card, and the driver will filter out the encoding data from the printing data. The user does not have to know job control syntax or ZMotif commands to send mag encoding commands to the printer.

Supported Macro commands are:

1.C01<Track1 Data> C02<Track2 Data> C03<Track3 Data>

2.${1<Track1 data>}$ ${2<Track2 data>}$ ${3<Track3 data>}$

3.~1=<Track1 data> ~2=<Track2 data> ~3=<Track3 data>

206 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002