Zebra Technologies 8 user manual Back of card

B: Setting Custom Card Specifications

Back of card

Partial transfer is usually caused by lack of energy being transferred to the card, i.e. the temperatures are too low or the speeds are too fast.

Step 1. Increase Back Transfer Temperature:

a.From the Card Specifications window, make a note of the default back transfer temperature settings; see Section B.3.

b.Increase the appropriate (single or double side) back transfer temperature by 5.

c.Click on the OK button.

d.Print a test card; see Section B.3.

e.Examine the test card.

•If there is noticeable improvement, continue increasing the back transfer temperature by 5, printing a test card, and examining the resulting card. Stop when the problem is corrected or there is no more improvement. If the problem is corrected, no more adjustment is required; otherwise go to Step 2.

•If there is no noticeable improvement, return the temperature to its default setting; and go to Step 2.

178 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002